Search results

US HIGH RANKED (older) MEMBERS WORRY ABOUT THIS HOBBY, someone going at designed speed that has a mishap with someone getting hurt will not help the HOBBY, someone that has a mishap in a moded truck, doing what it is NOT designed for and getting people hurt/killed will be VERY bad for all of us...

If it needs so much work as you say, and don't sound very happy, Why did you buy it

HAVE you thought about STOPPING, or just going FASTER, these trucks are fine as DESIGNED, wait till ypu blow a steer tire at speed, then talk about SPEED, and wait till you loose a wheel cylinder or line, then talk about STOPPING, If these trucks were designed FOR speed, thay would go that speed...

Not so much the look of a 10Ter but the LOOK of a WW2 prim mover, almost like the short wheel base BROCKWAY prim mover, the only thing missing is the behind the cab winch with the cable running UNDER the bed to the rear and sand bags in the bed for weight, I think the biggest tires that I would...

There was a long thread here on site ,2 maybe 3 years ago about just this, we talked about OTR truckers using propane and the kits for it

I found a few on ebay, both kits and conversions 1/35 scale, in this case you might need the conversion for the cab and the rest from tthe m923 model/models search 1/35, when that comes up, on the left click on models & kits

PSP Pierced steel plank, formed steel with holes, used for road ways, runways, in sand used to help getting unstuck. you have two sections standing up on the front right

Out standing job 1 question, where did you get the PSP

On my 1000 mile deuce trip, that was what my oil pressure was

wire number 91 is the ground, in the back of tm 2320-260-20 appendix D, is the wiring schematic thy the connector at the light, thay corrode, worse case, go to ground right behind the light

I'm guessing that thay BROKE bolts off in the block, drilled them out, screwed up the threads, hence the thread repair, the oem bolts should thread in, do not think a over size bolt will fit though the starter mount holes

As good as you are, I bet you have a stack of requests a FOOT high, I'm not sure how you can do these drawings as fast as you do, if you took a year to do a drawing, it would be better then I could do, thank you for sharing your talent

what about the 1/2 of 1% of the MVers that owns a m819, or the 1%ers that are wreckers owners

because the air pack is AFTER the MC

Shelter carrier hardware is in the classifieds

does not work to post TWO threads on the same thing

HendersonJ brought the conversion kits at auction (since sold) when the OM went out of business

I was looking on ebay for 1/35 that I could not live without ( guess I have to since I found about $2000 worth), while looking I found 2 maybe 3 different m35s, a m49 and 2 different deuce gun trucks, also found 3 different 5t gun trucks, a sandbox guntruck, and 2 different mules

What M/C would you use on 5t to do a splid system, other then that, you could use 2 stock air packs, add extera air tanks and about any pressure switch