Search results

:grin: Connie says it's easy to load goat pictures. 1 Scroll down and click manage attachments 2 A window will open, click add files 3 Another window will open click browse, this will allow you to select pictures stored on your computer. 4 Select the picture you want to add and click open, now...

Would like to thank all of you who voted for my Goat, some day one will win. :grin:

I would gladly loan you mine, just send it back when your done.

I had initial fuel leaks at first too, you will get them.

Getting close, probably a fuel delivery issue, still exciting.

Nice, thought I would sneak that one in without warning you, also got word today that your other large parcel has been shipped today UPS, you will be sitting pretty soon. Finding all these NOS goat parts is exciting, I guess more are on the way.

Picture from the manual, my T is different but same idea. The manual picture shows the air box heater line as the air brake tube which is not correct, they show the air line coming out the top of the T but it really goes no where in the picture when it should go down next to the drain line...

I used a outboard motor fuel line with an inline priming bulb, she fired first crank. Good news on the oil pressure, I'd rather have oil than fuel first.

I will have to look when I get home, however that clear tube coming down is different on mine, mine is a braided line that goes to the air pump. Where that allen plug is on mine it has a street T , the bottom of the T has a straight line going down for the air box drain, on the right of the T...

The tail lights ground through the body of the light itself, make sure the light mounting bolts have a tooth washer under the head to make a good ground. Also make sure the ground jumper between the carrier and tractor is clean/tight. For grounds around the dash area it looks like carrier...

Connie and Gama Goat would like you to vote for m38inmaine's goat...

Ground PM...

Wire #15 feeds power to the light switch pin "F" from a 15A circuit breaker located behind the passenger side panel. The headlights ground on one of the screws that attach the body wiring connector at each front side under the splash shield. Make sure those grounds are clean and check the...

Both wires at the horn are marked 25, it doesn't matter which way they are plugged into the horn. One is your 24v power going to the circuit breaker panel, the other is ground going to the horn button. Pressing the horn button completes the ground circuit. The horn itself does not need to be...

Quarkz has led in the front. See what type of flasher box you have, mechanical or solid state. If it's mechanical it's probably toast, I updated to the solid state. The conversion instructions are in the -20 TM. I rebuilt all my lights, Saturn Surplus had all the parts.

As much as I wanted to use the original batteries I just did not have the $400+ to shell out for 6tl's so I used a pair of surplus UPS batteries I had. I set them on the original tray and held them in place with a rubber bungee. I have the original hold down parts, some day I will put the...

I never left CONUS, Dave was a middle man for me to bridge the gap of the Atlantic.

CUCV on the left, different(shorter over wheel well) lengths, uses pin/clip to attach. On right M880 uses stud/nut to attach.

Dave came to the rescue for me when I needed some help from the UK. His attention to detail and timeliness was amazing, could not ask for a better friend, thanks Dave:grin:.

The brackets that attach the troop seats to the bed are different, I can post pictures later and show them. May be other differences though I am not sure.