Search results

In a nutshell yes Outside the shell most residential is 120/240. Which is 180 degrees out of phase. There is 3 phase 240 (3rd leg is typically 208 to ground) these are either open or closed delta. Theres 3 phase 208 which is 120 degrees out of phase. This gets you 120 to ground and 208 phase to...

Stay safe and remember the 6 Ps. Prior Planning Prevents Piss Poor Performance

If all you need is an applied voltage to transfer, pretty easy. Other than that youd need a sense line to detect loss (and return) of utility Sent from my SM-G973U using Tapatalk

003 is pretty easy to automate of thats a route you want to go. Just something to think of Sent from my SM-G973U using Tapatalk

The point being, Unless you know exactly whats in at and whats been done it needs to be checked. Too many times have I come across an oddity because someone played Frankenstein.

Picture is worth 1000 words, (on windows 10 thats 64 kb(sorry early morning nerd humor)) I wired up a 200 amp generac panel for my 004, but all my controls are custom.

MOST transfer switches dont switch the neutral, BUT there are some out there that do so it is very important to find out and setup your system accordingly.

If you can get me your specs and a schematic I could put something together Sent from my SM-G973U using Tapatalk

Good work. Sent from my SM-G973U using Tapatalk

Definitely need a neutral. Also be sure neutrals and grounds are separate. Make sure the neutral buss is not bonded to ground. Otherwise looking good. Sent from my SM-G973U using Tapatalk

And if that is the first means of disconnect you might not need a neutral. Big question to know for sure on that is whats feeding this panel? Sent from my SM-G973U using Tapatalk

You need a bushing in the back of that panel Sent from my SM-G973U using Tapatalk

Depends on how involved you want to get and whats missing. if its just the controls no big deal, if the regulator is gone its a bit harder

what all is missing?

Not bad, The only comment I would make is there is no flex installed in the conduit. might have vibration problems.

Yea.... Tis an unfortunate thing. The people I help get one setup usually get an annoying text from me once every few months to go give their gen set some attention (this is more so they wont bug me at 3 am when the power goes out).

Best answer: Free Beer

Best thing to keep the fuel system from gumming up, run it .

NEW is actually a mnemonic for Never Ever Worked

Please be careful with cams. Had one of our electricians killed when he goofed. Long story but they had this really bad practice of tape marking cams. Sent from my SM-G973U using Tapatalk