Search results

That is a bit much for a 4kw generator to start.

It comes down to cost. You can do an interlock or (better yet) a manual transfer switch and be done for a few hundred bucks in hardware. To go with an ATS the hardware cost goes up quite a bit. Its totally doable. Just more expensive. I can't speak for everyone here but for me I prefer to not...

I'm doing everything manual. In 2018 my goal is to have some solar with battery backup to run the fridge and lights. Yep, Mebane is just a couple of exits down the road. :)

The general advice I give in these situations is to run it as you need to then load bank it when you have time. This stuff doesn't happen in a few hours. The more load you do run on it the slower it happens. Its good to be concerned about it. Its pretty easy to manage if you have access to a...

+1 with what zanther said. You can't do an auto transfer to generator power if the generator isn't rated for the connected load. You'll need auto load sheading or you'll be limited to a manual transfer switch.

I urge caution and recommend considering a different method. i bought a gantry second hand for cheap. An engine hoist also works.

The first thing to do is not trust the gauges and use a meter to verify all the parameters (V, A, HZ) independently. Thats a big help to reduce chasing your tail. Go ahead and go through the manual so you have a good understanding of how they work while you wait for it to arrive.

Keep an eye open for a MEP-501. That is exactly what they are. :) You'll need a pretty hefty alternator if you do a DIY. Normal equipment alternators are in the 35a range and won't be nearly powerful enough.

He wasn't specific in his post but he has a MEP003 which has a mechanical oil pressure gauge.

I have a tank from a MEP003 parts machine that I plan to mount on the trailer with the MEP803.

I use cheap lawnmower batteries for testing purposes. Totally agree that I wouldn't rely on them for starting in service. They don't last long even when treated with care.

We do need to keep in mind that markets have a strong emotional component. My comments quoted are from the standpoint of a market mostly free from external emotional forces. Forces such as we are currently experiencing in the wake of multiple hurricane strikes. The market in your area may not...

I have both a EU1000 and a EU3000 generators. I bought the 831 specifically because it does 240v. I wanted a generator that could run my well pump with minimal fuel burn. It has greatly exceeded my expectations. However I've not lost any love for the Hondas. They have both served me very well...

It could be a reasonable price. I would want to see the unit running a load test before purchase.

To run that load with some headroom to start the HVAC compressor as it cycled on and off you'd be looking at something in the 20kw range.

I doubt it will start an AC unit that size. The max you should run on it is about 3.2kw. These do not have nearly as much overload headroom as the other 80x machines. Edit - I use mine when minimal power is needed. It works great to keep the lights and the fridge on. It will run my well pump...

Can you do a test with it in 3 phase mode? I expect the waveform to be a little better in 3 phase versus single phase.

Yep, 10% plus or minus is a-ok.

One thing to remember is that you can't use an ATS in a application where the connected load is higher than the generators capacity. To be code compliant you will have to have an automatic load shedding system to reduce the connected load to less than what the generator can handle. To address...

Its $750 to ship each of my motorcycles cross country. Maybe you should say you are shipping motorcycles. ;)