Search results

Google paint can shaker and you will find many examples.

To help with the shaking of the paint cans, use a sawzall. Attach the can to a long blade (tape, strap, clamp, etc) and have at it for a few minutes. A few companies even sell a shaker attchment

Good thing you decided to check your brakes instead of just driving it. At least now you will "know" what the condition is. Good job!!!

Really? I found the wheel cylinder list in under 10 seconds. Just took some scrolling thru the brake section. TM 9-2320-289-34P, Figure 122, Item #4. Now you need to know what the UOC (Usable on Code) is for your truck. That is listed in the first few pages of Introduction Section in all the...

Here are the "new" style MVs. Crewcab to boot. GL and the DoD are changing their focus. They are moving toward the fashion industry. This lot ended yesterday. http://www.govliquidation.com/auction/view?auctionId=7720280

All sold out. You should have bought one last week. ;-) The pulling of trucks is not new. Seems like it happens once a year. Sometimes every other year. It has been a while since the last pulling. Happened with CUCvs, Deuces, M809 series trucks and the M939s.

Closed for multiple reasons. 1 - This thread is two years old 2 - This is an MV site and not a gun site. The original post is about guns 3 - This turned into another MRAP thread. While there is nothing wrong with MRAP threads they go down hill fast 4 - The last post is political so this thread...

Welcome to the Steel Soldiers Looney Bin. Sit back, bucket up and enjoy the ride. If you can handle a Chinook, you can handle the M1009. The 12v/24v system takes a minute or two to understand.

My method of choice when I am doing one myself is the 4x4 thru the front window and back of the cab and a 1-ton chain hoist. Makes it so much easier to wiggle an jiggle the transmission into place. I have dropped enough transmissions that I can get one out in under an hour.

Here is one for you M49A2C wo/w Fuel Truck no Unit Number 1028-10178 Blue Warrant Tag visible but no date show Brake warning light Same contract number as the 1987 M35A2C above

You can always use this thread in the Paint and Bodywork forum http://www.steelsoldiers.com/showthread.php?116608-Paint-Information-(Codes-and-Sources)

Here is the Behr Marquee Paint code for a gallon 34094 - 383 color paint. I had to argue with the counter person about the number. They keep wanting to look at paint chips. I final convinced them to just type in "34094" and what do you know it came up. The guy that finally help me said I was...

The pump will install on the M1008 engine. Just line the timing marks up. With that being said, the "new" pump is almost 30 years old and probably needs to be rebuilt. The rubber governor ring is the weak point and degrades over the years.

Seems like I have a hand in this project. Along with Wreckerman Delivery service. I think we need a cut of the action. ;-)

Check the ohm reading on each plug. They should be about 1.5 ohm.

Suburban and full size blazers up to 1991. You can even get tilt steering.

Check the voltage at the terminals of the batteries. running and not. Don't use the chassis as a ground. Looking for the "12v" reading on the rear battery Also unplug the 2 wire exciter plug and check the voltage at each wire with the engine off and the in the off and the run position. Use the...

Welcome from across the pond. We have many members in the UK.

Welcome to the site. We have helped many people fix their vehicles. We will need more info. Since you have owned the truck has it ever worked? How is the wiring? Does it look like a hack job? What is your skill set? Do you own a multimeter and know how to use it? Know how to read a wiring...

So does he lean to the left or lean to the right