• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. mkcoen

    MKT Experts tell me what you see!

    Definitely the 4 burner cable. Just a little warning: DO NOT STAND ON THE REAR DECK WITHOUT THE LEVELING LEGS DOWN. Sorry to shout but that's a very important thing to know. The trailer can, and will depending on the weight, tip over backwards dumping people and items on the ground. It works...
  2. mkcoen

    MKT Experts tell me what you see!

    Congrats! I didn't get any lister bags in mine but the other one I helped pick up had them. It was also a MKT-99. Glad you have the cross-over cable. Chances are all of them will be there so you're good to go.
  3. mkcoen

    Working on the MKT

    Seems like all of them were hit and miss as to what was there and what wasn't. The thing I'm pretty miffed about is that they gave generators to all the folks that bought ones listed as "No Generator." Good for them for getting a deal but I went way higher than I wanted to on this one because...
  4. mkcoen

    Working on the MKT

    I had a request for pics of the Cambros with the Polar inserts so here they are:
  5. mkcoen

    Working on the MKT

    Fiddled with the generator some this afternoon. Apparently loosening even 1 hose clamp was too much work to drain the tank so they just cut the hose in 2 places. At least they left the clamps for me to reuse. Oil had been drained as well. After getting the fluids in order I realized I didn't...
  6. mkcoen

    MKT Experts tell me what you see!

    1st post: 1st Pic L-R Cambro drink dispenser exhaust fan flat aluminum piece from baking set Cambro food container 2nd Pic L-R 2 ovens with MBUs at least 2 ladders moveable cabinet Pic 3 L-R bottom of 5 ladder hand rails (should be 6 total) moveable cabinet water can Cambro food container...
  7. mkcoen

    Mkt pick-up hints

    How did the travel cover get damaged? I'm guessing from the picture it's the corner next to the tongue but I wouldn't think that was wind related. If the guy I already talked to falls through I'll PM you about my extra piece.
  8. mkcoen

    Working on the MKT

    Fired all the MBUs up this morning. All but 1 lit first try. The one that did not start had a "BAD" tag on it but I just shut it down, powered it off and re-tried and it lit the second go around. Only 2 of the 6 had fuel cap gaskets. High hour meter was 251 and low was 16 with most of them...
  9. mkcoen

    Where to get vehicle value appraisal for M925 in Oregon

    http://www.oregonaao.com/ Auto Appraisers Of Oregon Contact one from your area and just ask him if he can do it or refer you to someone that might be able to.
  10. mkcoen

    Working on the MKT

    Thanks! I don't need the screens or covers but if you had an extra cable that'd be a lifesaver. Anything extra you need?
  11. mkcoen

    Working on the MKT

    Here's a couple of things noticed just from pulling everything out but not actually setting it up: Missing: 1) 3 vent screens 2) Cutting board from right front cabinet 3) Both counter mounted (front) folding tables 4) 4 burner MBU cable 5) All pots and pans 6) Only floor mat is the center...
  12. mkcoen

    Working on the MKT

    Well I didn't get my nap but I did get some photos uploaded. 1) Using the big toys to load a trailer 2) Easier than using a Come-A-Long! 3) Good thing it's a 14k trailer 4) Finally Home 5) Lots of Cambros 6) Extra Front Travel Cover (SOLD) 7) One nice and one nasty invertor - but both work
  13. mkcoen

    Working on the MKT

    Got in at 1 this morning then back up at 7 so I'm still a little punch drunk and that's screwing with the MS. Opened the trailer up but haven't jacked the top up as I just wanted to see what was there. Full compliment of Cambro including the ice chest. The one that I saw yesterday that I...
  14. mkcoen

    Working on the MKT

    Planning to but think I got something in the morning in town so probably won't get into it until 1300 or so. We're about 80 miles from the TX/LA border and need to get it unloaded at Stan's 1st.
  15. mkcoen

    Working on the MKT

    Stopped for fuel and had to crack it open enough to verify MBUs are present. Crossover cable still installed so hoping the other cables still there too. Theres a strange Cambro with a hinged lid that I couldnt get a real good look at since its mostly buried but not a style I've seen. Couldn't...
  16. mkcoen

    Working on the MKT

    Sitting outside GL at Camp Shelby right now. Have an hour yet.
  17. mkcoen

    How to tell where my M925A2 was stationed?

    I would prefer you called them soldiers or called them nothing at all. I served on active duty, the Guard, and the Reserves over a 15 year period. There were unprepared, undisciplined, and fat soldiers (and entire units) in all of these organizations. Look at the standards present today on...
  18. mkcoen

    How to tell where my M925A2 was stationed?

    Is there a reason you're continually trying to insult a large number of veterans? Did the National Guard units that served in Iraq and Afghanistan (or WW II, Korea, Vietnam, Desert Storm) do so any less honorably than active duty units? Did they just pretend to get wounded or killed in action?
  19. mkcoen

    2014 VIN Info Thread

    1991 BMY-Harsco M923A2 Cargo Truck A. 2305782 B. NL137J C. 2320012300307 D. GL San Marcos, TX E. 36 -1 4/133 (right side) C76 ( left side) The truck appears to be a rebuild but no rebuild tag. Engine tag identifies it as a 2009 engine and all batteries were stamped 2009.
  20. mkcoen

    found a v17a/mtq........how rare?

    Looks worse for wear now. Both front tires rotted and flat. Comes with a spare tub and ad says original has rot. "Ran when parked" actual wording in the ad.
Top