Search results

Sweet! Looking good.

Never mind on the pics. I see the two types in their catalog, VS-1072 and VS-1090.

Thanks for the info. Who is the distributor? Can you post a picture of your valve stem? I have seen different types.

You should check ebay as well. I have seen several listings of them there.

M915 is 6x4 M916 is 6x6

Dave- Welcome to Steel Soldiers! Glad to have you on the board. I'm always checking your website for ideas and good stuff.

RE: Re: RE: M816 vs M819 Wrecker http://www.mvdataplates.com/

Re: RE: M816 vs M819 Wrecker Ron, I think there was a M933 tractor/wrecker as part of the M939 series.

Don't forget the M246, M819 and M933 tractor/wreckers and the FMTV M1088 tractor. There is an 8x6 tractor in the M915 series (M920) but it is not a 5 ton.

Ron, Have you used your M819 to pull trailers? Which ones?

In regards to the tires on the M819, I read some interesting things in the -10. 1. Different tires are shown for front (16 ply) and rear (14 ply), both 12.00X20. How can this be? 2. Ground clearance for M819 is shown to be the same as standard, 10.5 inches. This should be more with the...

I am looking into getting a M819 wrecker. Juding by the -10, key differences on the M819 vs M816 are the 5th wheel, longer wheelbase, longer crane length, 12.00x20 tires, and lack of rear winch. Are there any other key differences to take into consideration? Does anyone know if there were...

Don't forget about priority #1, safety! Generator exhaust claims many lives each year. Make sure you have adequate air flow and use a co detector.

Dan- I would like to order a few. What delivery date correlates with the deposit? Feb or April? If production or shipping of the locker is delayed, at what point is the $100 deposit refundable by choice?

I am so glad to hear the disgust about the M35A3. I hope everyone here can agree to stay away from them, and I'll agree to take them in as refugees. rofl There is one on gl now btw...

2 piece rims where used on the M35A3 reset program. They are tough to find as surplus.

RE: Re: RE: Where to find a Detroit Locker for 5 tons Complete axles with lockers www.easternsurplus.net

RE: Re: M543A2 Winner On GL Glad to see your baby arrived safely. Post up those pics when you can! What was the final result on the shipping weight and bill?

:ditto: I wouldn't place any great reliance on the condition codes. You could have a gem or you could have a big paper weight. Hopefully, the former!

Here is the reply I received via email: Valve stem is $29.02. All prices are each f.o.b. Memphis , TN. I will be out of the office next week but you can contact us at 901/774-0600 and ask for the parts department. Regards, John Browning