Search results

Good idea. That would end the great debate on what the difference in temp is between pre and post turbo.

Thanks Bjorn. I don't have that issue :( . The 1780 was new, still sealed in the bag when I got it, so that shouldn't be the problem. One of the 2298's was new, the other was used but tested good. Supposedly the headsets work, the wiring and connections look good from a visual perspective. I...

Update: Got everything mounted and connected. I have power to the amp but no communication between headsets. What should the settings be on the 1780 and the 2298 boxes? First off the 2298 boxes have the caps installed on the bottom of them so that is not the problem. The commander (driver) box...

What are you trying to cover up? Make one out of marine plywood.

Or a dual gauge.

They have beautiful condition surplus firearms too. Never fired, dropped once.

GREAT pictures! Northern Michigan in the fall is beautiful! Nice turnout too.

If your engine is currently not installed in the truck, now is the time to add the holes pre-turbo. You can plug them for now and add the probes whenever, if ever. At least the holes will be there. Even if you only plan on using one thermocouple, put in 2 holes. 2 probes can help you narrow down...

All yellow.

:driver: RETREAT! RETREAT!

Would it be ok to connect the cx4720 to the cables that hook to the back of the slave plug on the inside of the cab since they are a constant power source? Or would a bus bar like that found in a cucv m1009 connected to the cable lugs for the slave work also. Then that would give more places to...

I found this thread. http://steelsoldiers.com/index.php?name=PNphpBB2&file=viewtopic&t=3353&start=0 This helps. Anyone have an extra cx4720? I overlooked that cable, pretty important one too. :) I also don't have the supressor, but it should still work fine without it.

That would be a good spot, but it's got a heater. Being in the north, I don't want to give it up. :)

That's a great idea. There are a couple reinforcing ribs on the inside back of the cab that I could mount the board to. Keep 'em coming.

I'm getting ready to install a vic-1 system in my M35. Does anyone have pictures of their installation so I can get some mounting ideas? I have 2 springer seats in the cab, so I have a fair amount of space between the seats on the back of the cab, and everything would be accessable. Bjorn, I...

If you want a D turbo it looks like there are lots of guys that would swap you.[code] I have a D that I will swap for a C.

Spotlight mounting and wiring completed. They work great! I used a 20 amp breaker and along with a switch on the lights themselves, I wired in a master switch inside of the cab. You were right Bjorn, it was the #10 wire. It is a heavier gage wire that is a constant power source. I will post...

NICE. The right tool for the job! [thumbzup] She's coming along nicely, Bjorn. Just had a thought (uh-oh), how feasible would a tilt cab be? You know, like the old cab-over semi trucks.

Welcome to SS. :beer: The BEST MV site on the web IMHO. If your truck runs as good as it looks, you've got a winner! [thumbzup] That's one clean, green, mean machine. :driver:

rofl It is amazing. And no opposable thumbs!