Search results

RE: airsoft bb depends on how much you want to spend, esp since the runflats usually come with the rims. and DO NOT try cutting down the magnesium runflats for obvious reasons, huge fire that will melt metal. let alone it would be worse off balance wise.

RE: airsoft bb with the hmmwv rims you need to use the runflats, or a beadlock of some kind. if you lower the air pressure or play offroad otherwise the tire can lose the bead (since 16.5's dont have much of a safety bead on the rim)

RE: airsoft bb no, only for the rubber ones.

RE: SCAM SCAM ALERT ENOUGH WITH THE ALL CAPS, quit yelling at us ;)

RE: airsoft bb amj the greese i speak of, is a lubricant they smear on the inside of the tire so the runflat doesnt stick to it.

RE: airsoft bb i have ~10,000 airsoft bb's in each tire, but remember i have 38"x14" tires.

RE: airsoft bb I run them with my tires, just hmmwv beadlocks though, no runflat. I would not put them in the tire if you have the rubber runflat with the greese.

rizzo, give me a shout on the cell phone sometime. I wonder what dealer has it ;)

if it stops when you coast, then yeah its very likely that its driveshaft related. either bad joints or a loose cap.

RE: anyone near Lake ochechobee <spell check didn what state? general location?

RE: cool... lol

i'd agree with a ujoint, or one tire could have thrown a weight. does the vibration change with the position of the steering wheel? do you feel it in the wheel? or from the seat/body?

no, the controller card is tucked up under the dash. it may be way up there, you will see a blue wire coming from a grommet in the firewall under the dash near the pedals, follow it to the controller.

within reason, yeah. but it will shorten there life some if you do it excessively.

RE: Re: RE: spell check I fixed the double post, but you do know that you can delete your own posts, right? you just click that little blue X at the bottom right side of the post.

No wait light, means the card is really messed up, the usual failure method is a transistor that controls the ground for the relay itself (ie the wait light will still work but not cycle the plugs). since you have no light, its something more major. Pull the card out and check for burn marks...

easiest fix, read the manual glow plug article stickied at the top of this forum. or you can get a new card for ~$75

no sound from the relay means the glow plugs didnt come on, this is a issue with the controller card.

i forgot to ask, does the fuse blow immediately? or after some time with the lights on?

RE: Re: RE: Mufflers For M1009 what would you reccomend, a filter top cleaner? I was not aware that it was so restrictive.