Search results

If the steering is shot it will pull under braking. IE ball joints, tie rods.. ect... the other thing that could cause that is worn A frame bushings. Seen it before.

I have seen and Installed a couple 6 lug 14 bolt full floater axles. I thought it was a load of **** till I had a customer want me to install his on his 95 Chevy 1/2 ton. now its not a factory unit but a drive train shop can build them.

mine shifts at 20 and 30 MPH. You can adjust the modulator but best thing to do is install a Heavy Duty Shift kit to increase the line pressure and put in the softer springs in the governor to lower the Shift point speeds.

That is not really too high.. you sure the battery is not weak and trying to charge up? The norm is around 14-14.8 volts.

#1 No and Yes #2 Yes #3 No #4 Yes #5 Lots

looks like hillbilly hick stuff.

and they said the same about the dumpster in the motor pool........ I dont like playing chicken with CID, all it takes is a pissed off person and its down the pipes for you

And CID too!

thats only 40 bucks a ton.... I have not seen 200 in over a year. Man for 200 a ton that truck in a cab and frame mode would set you back 1400 bucks at least. Guess its to the scraper.

scrap for 200 a ton? when did the price go back up? last time I checked (2 weeks ago) it was just over 20 bucks.

:popcorn:

done that too.. it really works its not a joke. the brake fluid will swell the seals and away you go.

Take it from a guy who knows.... Removing the card and installing a switch = ****ty starting. I have had 3 sweet CUCV's and two of them the card was not working and I installed the "switch". Yeah they start but they start so much better with the stock system. I have done some looking and I...

We use GAA and a brush. Give it a good coat. If your not going to use it just paint it.

And the "newer" cabs have both cut outs for the steering. My NOS one i got had them and the plate for the Air filter.

Well if you like your ears Bleeding..... Its really really LOUD!

yes

HOLY CRAP!!!! I got my 3 with in 36 hours!!! THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I just used the stock filters... only about 15 bucks to change all 3. Lot ezer then trying to use a old sock to filter the stuff.

well I have burned 100% used ATF, 100% gas, 100% diesel, 50% used motor oil, Paint thinner, New motor oil, Home heating oil, Kerosene, and every mix of the bunch. Only problem I have had is a little hard starting with the Gas and fuel filters getting very dirty with in a month or two. You can do...