Search results

mine runs at 35 psi at 2700 rpm. I have run mine at 2700 rpm and well over 65 mph (new 11:00 tires) for 800 miles at a strech and no problems besides a little slobering from the heads. I have had mine up to 3000 for a short dash befor and it sounds great. The multe fuel is a very solid engine as...

Umm where was that pot.... just asking......

i drained mine the other night for the firts time sence winter and i got almost 2 gallons of oil/water sluge!!yeah you need to drain them atleast once a week.

clinto what the he77 did you do now?

umm lets see.. with a 8.1 checvy motor in it I bet it gets 4 mpg lol thats a buck a mile!!

a bunch of us are going sunday

talk to mang (mike) his friend has a really nice one for sale and it has a crap load of lights on it. its on ebay right now too for 5k

Kenny.... you feeling ok? planing on road side repairs? whats the deal here

hmm... look at the pics of the jeeps in the bed or m35's... Its a tight fit in a 8 foot wide bed.. the 135 is around 7 foot wide

my 09 was all stock. (rebuilt from ground up with stock parts) and it would do a ez 25 mpg on the highway.

Tom knows his stuff. Im up at Alfa about once a month or so. The rims he uses are 16.5 6 lug GM rims, not some aftermarket junk.

Tom knows his stuff. Im up at Alfa about once a month or so. The rims he uses are 16.5 6 lug GM rims, not some aftermarket junk.

I thought you were running 1100's on your truck... the trailer come with 1100's?

Ok Deuce and deep mud with duals and NDT tires = this!!

hmm thats not good at all. something is a miss here. Wrong flywheel I would guess, or maybe cover. But 90 miles with out one alt charging?? Umm trailer it man, trust me its going to suck alot when your on the side of the road and no power in the batts. also get the fly wheel checked out... it...

I have a BRAND NEW T-stat in my truck ant the only way i could ever get it past 185 was when I broke the fan and had to remove it and I was pulling down trees when it was way over 100* out. Then i could get it up to 200* but as soon as I removed the hood and sides 180* was it!!

well.... pipe size is all the same its the mufflers and flanges you need to know the OD or ID. pipe size is OD and mufflers and such ade ID (ID means it will fit over OD)

yes 3.5 inch

If your just going to splash accros a stream or somthing like that you could redo all the vent tubes (dont forget the one on top of the trany) seal the air intake, dont forget all the axle seals and lock outs, and run it. But if you want to run under water, get a different truck! You put that...

well i found the torque of the multi... ld (non turbo) 300fp @1400rpm. ldt 305 fp@1500 rpm and the 5 ton lds 425 fp @ 2000 rpm