Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
If it is the plastic line leaking, usually tighten it only make it leak worse.
It will require replacement and use of a tube insert.
DOT air line works well as replacement fuel line.
This has been covered many times.
Why would you assume dot 3?
I would test what is in it and match it, unless you have a personal preference. Then I would use what you like(which may require a complete flush/clean, depending on what you find is in it now).
If your not cranking fast enough, you won't get the right fuel output either.
If you can only get 45 seconds of crank time before batteries are dead, I think you have a starter or battery issue.
I buy mine from Sierra Marine supply.
http://www.wholesalemarine.com/shop-by-brand/sierra-marine/generator-parts/sierra-fuel-filter-kit-for-westerbeke-onan-25920-149-1445.html
You need to unplug each glow plug to test it. Do not use a light, use an ohm meter and look for 1-3 ohm. This is clearly spelled out in the -20TM, under troubleshooting.
Have you cleaned the filters in the bottom of the pumps?
If they are plugged, the pumps will make no noise(not pump) because they are holding the pressure.
Why would you ask a question on a forum with over 40000 members and expect a simple answer to your question without drawing curiosity? (because you can't)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.