Search results

Iam installing a new Injection Pump in my 6.2 Diesel M1009. Not my first time but what need to know is if I can turn The crank without the pump installed in order to better align the top hole. They are off to the left and putting the pump back in is a crap shoot to hit the aligning pin and...

I am in the process f replacing the fuel tank on my M1009 and I can't seem to find the correct straps that have the hook on one end and threaded on the other end, I checked LMC and they dont have them for a 25 gal. Tank, any help as to who has them.... Thanks Scott

I've looked for an answer, but all I've found One side seizing not both at the same time any ideas of why this would happen, everything is new as of 2016 except for the Proportioning Valve, any help is greatly appreciated.... 73, Scott

I did a search first but nothing pertains to this, The other day when cranking the window down the clutch inside the handle broke I could hear it rattling around, the handle just spins up or down, the problem I have is I cant get the arms to move so I can get to the right rear bolt of the window...

https://redballonline.org/ Who's going? redballonline.org rEDBALL SWAP MEET SEPT. 21 & 22, 2018 West End Fairgrounds Gilbert, PA 18330 8 am - 5 pm

Pennsylvania, March 3, 2018: Annual REDBALL Military Transport Winter Swap Meet at Mt Bethel Volunteer Fire Co, Mt Bethel, PA (NEW LOCATION). Tables full of Militaria & Military Vehicle items + refreshments & low admission fee. Show: 9am-5pm. Vendor setup: March 2, 2018, 9am-5pm. Contact: Jim...

Iam hoping that someone can help me out, Iam in search of the Inter-Connecting cable that goes from the Amplifier AM-6545A to the Coupler CU-2064 it would have a NSN # of 80063-A3210317-1, or a Part# of 755017B0791 and it is 5 ft. 0in. long, I have one but the U & V pins are broken off which...

I want to drill the holes in the fiberglass top for the radio cables to go threw to the antenna anyone know the correct size for the HOLE SAW I cant seem to find it in the manusls........Thanks for any help...Scott O&O

Went to the store everything fine, came out started the truck evrything fine, drove about 2 feet and it died not a cough or anything like Ive experianced before just died like someone threw a switch and it wont start it seems too be getting fuel from the checks that I did but Iam not getting...

I picked up a Ste-Ice over the weekend, seems complete except for missing the Diagnostic Connector Cable W1 and the Transducer Cable W4. Anyone know were I can get these cables or have them for sale, I guess this is why I got it for so cheap. Thanks for any help. Scott O&O

When I replaced the Injection Pump the throttle cable end bushing had slipped out of the cable end/eye and is now useless, I'd need too replace it but cant find any info or a part number for it, in the pics it is the distorted black grommet, the sleeve fits inside that and it is slipped on the...

Anyone out there know if the three groove crank pulley from a civi 6.2 is the same as the military 6.2 crank pulley. Thanks for any help, Scott O&O

Iam in the process of replacing the injection pump on my M1009 everything is going smoothly, when I removed the old pump on the front of the pump were the three bolts arethat holds it to the gear theres a plunger (lack of a better name) seems to be spring loaded the rebuilt pump is missing it...

Iam going to reolace the water pump on my M1009 and will probably be using the Napa new one #44099 anyone ever use one or should I try to find a GM one ,any in-put would be helpful. Thanks Scott

Need some help here what are the voltages I should be seeing at the relay(doghead modification done) when the ignition switch is turned on, I have 25.7V at the RED wire on the relay but only getting around 20.3V at the PURPLE wire when I go to start, it seems a little anemic, is that right or...

Iam in need of a DC power cord for OF-185 Vehicle Mount, the only info I have is this MS3116F12-3S is the connector(Newark 16F3633) on the cable, P/N 420979-801 is the official DC power cable, its a 3pin female connector anyone have one or can point me in a direction of the cable or maybe the...

I just picked up a new GM Fuel Filter Assembly with a new filter, its new in the Gm box and in a sealed wrapper but its missing the pressure switch and the hole is plugged with something looks like some type of resin or epoxy? is that right or does that have to be removed and a switch installed...

Ive been piecing together a Hot-Water Heater Kit and Iam in need of the Heater mounting plate part #8710641 its what the heater assy. sits on the plate is mounted to the fender under the hood, if anyone has one and can help me out id be much abliged pm me or send a email to m38a152@hotmail.com...

Are there any problams that i may incounter when I replace the tailgate on my M1009 just asking because I have limited acess to a garage and Id like to to do this as fast as possible. Thanks for any help, Scott

Has anyone had a problem with the flex plate on there CUCV's and what whould the sound be if it was coming loose picked up a wierd sound today the best way I could compare it would be like a fan hitting something its not that I checked, seems to be about were the firewall is and it comes and...