Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Fellas,
Just replaced the fuel sending unit and got the fuel gauge to finally work....replaced the rubber lines from the tank to the metal fuel lines. We did let the lines hold the tank and replaced them plus the filler neck. Now I am having problems priming the fuel system (multiple cranks...
Fellas,
Finally found why my fuel gauge was not working and its the Fuel Sender assembly not working. My questions is, what size tank do I have (Napa claims there is 25 & 30 gallon tanks)? Any recommendations on a good place to order a new one? Could not find much helpful information on the...
Fellas,
My fuel gauge I believe is shot (needle is past the E and all connections seem to be in tact). Where would be a good place to look for a replacement gauge?
Thanks in advance,
Casey
Fellas,
I have been having problems with my front battery. Just replaced the battery and driver side alternator (gen 1 light was coming on and reading low volts when started) ...after all was put in place:
Fried this wire, 3rd connection from the left:
Now it will not start and appears...
Anyone have a good place to have the generators rebuilt in the DFW area? My Gen 1 light is coming on and killing my batteries after a weekend of driving.
Fellas,
I have a 86 CUCV 1009 that I keep at my deer lease. Was wondering what would be the best oil filter, air filter and oil to use in extremely dusty conditions? Thanks for the help.
Casey
Fellas,
I wanted some opinions from yall...My starter relay stuck the other day (first time since I owned it and have started it about 100 times). Would yall recommend replacing the stock relay first or should I do the "doghead starter relay modifcation)? With the modifcation, I read where...
My CUCV is at my deer lease now and can not measure the rear top bolt size. I would like to replace these with wing nut bolts for easy removal. Can anyone help me out please?
Thanks,
Casey
I thought I fixed my tranny problems by adjusting the regulator by the air filter (moving it back to the fire wall)... It still shifts hard a WOT but will shift at low RPMs if I let off the gas but not at normal speeds. Any suggestions what the problem may be?? The vac lines seem to check out...
Hello,
I am having problems with a few things and really dont have much free time to trouble shoot. Any help would be greatly apprieciated!
First: Have the same old problem with hard shifts and high rpms. Any pictures showing the vac line replacements and modulator?
Second: Speedo and...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!