Search results

will one of you fine gentlemen run out to your deuce and measure one of the west coast mirrors for me? I need a measurement from top stud to bottom stud, then width and height of just the glass panel itself. I'm at work and I'm looking at a lighted mirror that I'd like to use and can't find the...

Ok, got myself a complete hot water cab heater kit for the deuce. Got it used, looks like I have everything I need for the installation. I have pretty much figured out how everything goes together, just wondering how to wire it up and run the ducting properly. I have been searching the site and...

Ok, already did the searching and was only able to come up with things like issues with the parking brake... So here's the question. Have a 70 deuce with multifuel, and suddenly is making a nasty grind/clunk sound, seems like from the tranny, when reversing or even rolling backwards in neutral...

Got a question about thle glow plug resistor bank. Supposedly they are mounted on the firewall, I know what they look like, but do not see one on my 86. Now is it true that if it has one of the newer style silver glow plug relays (which mine does) that it will not have one? Or have I just not...

Anyone know what the bolt pattern of the 1008 is? I believe it's 8x165 but not sure. Looking at getting a set of 16.5" wheels. Thanks in advance.

Injectors for the 6.2... I have done research here but haven't come up with a complete solution yet. I will be replacing the injectors on my 1008, but am unsure which ones to get. It is my understanding that there are several different nozzle patterns, and I am pretty sure they're the fine...

I have looked so many places for the last 3 weeks...and Im convinced that there isn't anyone out there with a new or NOS complete model 80 fuel filter base assembly. Closest i got was found a couple bases with no sensor or heater, that was all. Anyone have one they'd be willing to sell? Or know...

I passed a nice looking 1009 getting pulled up onto a rollback on I-285 yesterday just before exit 22. Wondering if it was anyone on here....

My dana 60 is missing the interference-fit 90-degree vent hose adapter that presses into the top of the axle housing. The military installed an ill-fitting plastic replacement that pops loose on its own, and when i changed the axle lube i could tell there was some water in it. Any leads on where...

Ok, checked all the basics and researched back thru threads pertaining to gen 1 problems, but here goes... As of late, over the last month or so, I've been noticing my lights getting dimmer at night, and also my volt gauge is reading on the "high" side of the yellow area, used to be right in the...

My truck was used in the Navy Seabees, and judging by the wadded up papers found in the bed and GL decals it came from Fort Hood. I was curious about the numbers on the front bumper and tailgate. One side is stenciled "ORD.73" and the other "TAC 18". just wondering if anyone out there had some...

Well, here's another little surprise from the ol' oh8. I was getting underway with my Doghead relay mod, when I found this. I got the diagnostic port out of the way and dropped the relay plate, and what I found was 2 smaller relays on the plate. The starter relay, however, was a big hefty relay...

A little confused... I know hiw these fuse blocks are with corrosion... My 1008 has a little melting going on at the fuse terminal for all the lights. I adjusted the terminals to have a good bite on the fuse blades and stop the arcing. Fuse still getting really hot, never blowing the fuse and...

Ok, here's what I got. My 1008 came with its canvas bows and the canvas, but the canvas has a few holes in it and about half the turnbuttons are broken......what to do.... I'd love to keep it but fear it may be more trouble than its worth finding the parts to make it whole again. Suggestions...