Search results

I disconnected and checked the the capacitor/suppressor and no change, I also disconnected the radio feed harness and still no change, still have a 5.8 mA draw. I disconnected the starter wire and all other hot wires one at a time from the buss bar and still no change in the meter. Could...

Thanks I'll check that out also. Great Fall, MT? That a city that I'd love to move to. Any jobs there, in the optical field? I've been making glasses now for over 40 years..

I removed the battery wires from each alternator, with no change to the draw. Then I tried removing each fuse, one at a time, from the fuse box still no change, I still have a 5.1 draw, I'll try the capacitor/suppressor between the buss bars, and see if that helps. Any other places I...

I'll check these things thanks...yes I know I have a interior light but it only lights up with the turn of my headlight and dash lights dimmer switch, it doesn't come on with opening the doors.. It doesn't draw enough to cause dead battery...yet[thumbzup]

What is the acceptable (if any) current draw on a M1009? I've checked my and I'm getting as 5.1 mA reading. Alternator # 2 has been rebuilt and Alt#1 has been replaced with a know good alternator. I wasn't sure if the GP Module or some other module in the M1009 would cause that draw or not..

Rebuild Alt & steering wheel straighten I rebuild my #2 Alternator, with a kit from CUCV Electric, now she puttin' out 14.6 V...[thumbzup] Straighten my steering wheel, it was so off, I couldn't even see the right turn signal blink on the dash when I turned it on...:hammer:

My buzzer works, but I think I'll unplug it....sounds like a sick cow in heat..:mrgreen:

Thanks, That's the best answer I've had yet, as a matter of fact, I've been having trouble with my front battery while driving with headlights on also, come to find out my #1 Alt wasn't chaging at all. I've been driving around with no trouble at all, but last Friday I drove it to work (about...

My M1009 has one, at the bottom left on the bottom of the fuel guage next to the brake light... #9 in photo...

What?

I've just replace my GP Module and have gotten all dash light working as they should, but now my seat belt warning light stays on after I start the engine, it work correctly for awhile, but now it's not. It goes off when I turn the key to off, it comes on when I turn the key on, and start the...

Thanks, As much help as everybody has been, with all my problems, I just wanted to try and return the favor...[thumbzup]

Thanks, I printed out the pages that cover that in TM 9-2320-289-34, I wasn't sure that the kit would work, I'll save the fiber washers... My #1 Alternator is putting out 14+V But the #2 is about 13.5V and the #2 Gen light is flickering at idle, and I thought that it needed a rebuild...

Isolated Ground Rebuild Kit?? Warthog, Will the complete rebuild kit from CUCVElectric work in either alternator? Isolated ground #2 Alt or #1 Alt ?

CUCV Wiring Diagrams color (except M1010) I've been working on these, hope they'll help someone. If there needs to be any correction just let me know. I corrected two with warthog's help... Corrected Charging Circuits 09/29/2011

This pass few weeks I've added new GP Module and I've got to say that " LIFE IS GOOD!!! Iv'e cleaned up some wiring thanks to Warthog and doghead help, Thanks guys!!! My M1009 runs so much better amd starts a lot easier, and also my gauges and light are working again, and my fast idle sol is...

What's help me is, when I to a search I click on "Advanced Search" and under key words, click on "Search Titles Only" and it makes it easier for me to find what I need.

What are the colors numbers of the Rustoleum?

Thanks for the info!!![thumbzup]

M1009 Rear Seat & Front Bumper I'm needing a rear seat and a front bumper for a M1009. Does anybody have one? Thanks, UncleSam