Search results

Another questions you guys may be able to help me with. I have an MK48 which had a leaking hydraulic cooler. We repaired and reinstalled it. Someone in my yard started and tried to drive the unit before we refilled the fluid causing the automatic hydralic yaw steering to disengage to come...

I have a HET with a similar problem. I drove it from Sparta WI to Long Island NY ran fine. it sat for a year now wont do over 30mph. Try changing the 15/40 first to see if it helps or since it looks burnt pull the cab then the transmission and do the job once. There are rebuilts in emay look...

I have about 6 of the container attachments needs the connectors to the container. Can sell you a few cheal im away to April 2

I have a few lmtvs like how solid the M939's are compared to the LMTV cat motor is great but too much civi parts there and not built as well. Example. A LMTV muffler rusted out where the exhaust end pipe meets the muffler. The hot exhaust blowing against the frame rail melted the air lines...

I have a few of these and the smaller 24" bars 2 HID lights and 1 IR in center. The Power are in the two Large Pin Outs. The lower one (with ibis tech sticker up) is neg and top is positive. I have the pin outs have to scan If you need the plug for the unit here are the part numbers. I bought...

Hey anyone know what part the sensor on top of the fuel filter canister is on an M998? finishing up the M998 I received from GPLNT which someone stripped on the way. Looks like its a water sensor or something screws into the top and has a 4 pin plug which connects to a harness? Thanks in...

on ours we made up some dielectric hydraulic lines and added jic fittings - no more issues

Just received am M998 seems they stripped the main pulley and some front engine parts. Looked theu the TM's but couldn't find an exploded view of the engine. Anyone know where I can obtain? Didn't see anything on the older posts thanks

I have a M1009 trans dosent like to shift anyone know if the vacuum line to the trans would affect the shifting? if i drive and get higher rpm she will then shift does it by itself cant shift with the gas pedal

If you need help with any of the hydraulic hoses i have about 10 of the kits from oshkosh have a bunch of the radiator cores and radiator guards.

Nice Job!!

Picked up many trucks from them Definitely the best GL pick up location

Cant make this weekend but will be in the NYC Parade Tuesday after next week we are available with a number of trucks

I bought a floor kit from these guys: http://www.ohc.net/military.html The kit came with everything for a M871 deck. Wasnt cheap but it was a screw in kit precut and treated. Installed in 1 day

Offloading some Ammunition Trailers

Shipping the HET from WI to NY would have been $10K I drove it back $1200 airfare $800 gas $220 Tolls And K is Right driving it home is a great experience

Diesel in Sparta W! was $3.29 per gallon. I took as much as i could carry! Ohio was about $3.98 PA and NJ were about $4.89 per Gallon. I just checked the receipts looks like about $729 in total fuel. Either way it wasnt as bad as I had expected. Truck had 1/2 tank when i picked it up so...

$600 in fuel not that bad

Just drove a het 1300 miles from Sparta WI to NYC. The HET drives like a big car 47mph was my top out but in the hills of PA it went up every hill without losing speed My butt hurts from the military no frills sheet ouch!

I have a Battery Tender DVD-40 dual 12v charger I use. Its expensive but senses and charges batteries great. Its brought a few batteries back from the grave. The other one is a Batttery Tender 022-0165-DL-WH 12-Volt 2-Bank Battery Management System Its 80 bucks on Amazon and charges 2...