Search results

I want 12 volt starter also I do not use any 24 volt. The box was gutted when I bought the truck. Sent from my SM-G960U1 using Tapatalk

Looking for some advice/help converting my m1010 to 12 volt charging system. My duvac went haywire overcharging the front battery. Already sourced leece Neville 12 volt alternator . Need some help with what wires to keep . Can't find wiring diagram anywhere I look. Thanks in advance. Sent from...

Looking for the wiring to for a 1985 m1010 Sent from my SM-G960U1 using Tapatalk

It will start but once it stalls it takes quite alot of cranking to restart

Changed fuel pump last winter but that dosent really mean anything the way parts are today

Have no signs of water leaking water in oil or oil in water have fuel to injector pump but sure how much i should have at injectors do have some but not a spray glow plugs are only 6 months old but didnt check them

My m1010 smokes white when running. But wont stay running long enough to warm up.43000 miles on it no loss of coolant. And no signs of coolant in oil.any suggestions where to start looking.

I've had the truck 2 years it's a daily driver 44,400 miles on it it started all of a sudden .on 7/20 I am leaning towards the pump myself because when I checked the oil it was slightly over full a little thin and really black and it isn't due for a change for 3000 miles I'm going to call the...

Already have an after market filter stock base leaked terribly changed fiter today appears to have good flow started the truck as soon as it starts to warm up the idle gets rough and it stall plus a little white smoke from exhaust never smoked before

My 1985 m1010 starts but won't idle.It won't Rev but I can keep it running. I was driving up a hill when I lost power. Checked for a blocked fuel filter it's getting plenty of fuel. Any ideas about what to check would be greatly appreciated. Thank you Rick

wiring issue. started with dash gauges not working now no power to dash.any help with schematics would be greatly appreciatedthanks in advance

Can anyone tell me what size fuel tank is in my 1985 m1010. Thank you in advance.

Filter housing is leaking and fuel preheated not working. What is my best way to fix?I understand this is a common problem. Any input would be helpful. Thank you.

Starter and batteries good have a dipstick heater I know its not the best heater but truck won't start even with starting fluid if I don't plug it in. 99%sure it is the glow plugs they look like OE but to **** cold to mess with it ttoday -25 wind chill. Thanks for all the advice.

Resistors aren't bypassed .I will check that also.thanks again

38000 miles starter turns fine. Found the test in the tm so I will check the glow plugs in the am. I just don't want to change the way they work with a hacked in switch because the relay is cycling and the wait light works

Thanks for the advice I will check them for resistance values in the morning

Definitely getting power didn't feel for heat. I don't like using the fluid but have no choice till I short out the problem. The truck is my daily driver with all my tools and equipment in it. I can get the autolite glow plugs in stock. Have to order anything else.

I don't think my glow plugs are heating up. I have power to them but won't start without starting fluid. Had no issues last year. My question is will autolite 1110 glow plugs work without modification other than the spade connectors? Thanks in advance.

Thanks