Search results

Great article.

Check diagram in first post. It's on the front of the regulator.

You get 50 amps on most but some have 200 12 and 24 outputs. Just check the Neishoff website under Military.

Okay so I called and they let me talk to an engineer at Neishoff He says in the event you install the alternator on a TH400 equipped truck that does not use the 14v output it needs to be grounded because the electricity needs to go somewhere. If you are using the 14v out you run it to the...

I just did the swap from the 60 amp alternator to the 200 amp dual voltage alternator for the 12v out. In the installation it asks the ground the +14v to the alternator body with a jumper. Before I do that I want to see if anyone knows why ground a + connection? Or if you have the 200 amp...

Hello everyone. I'm looking for some guidance on converting up to the 4l80 overdrive transmission. I currently run the 6.2 and 3l80 3 speed and want better drivability. I'm thinking about getting a new 4l80 and using the tci control box but wasn't sure if anyone has done this or knows an easier...

I'm going to probably run the 24v Ramsey 12k so I guess I'll be drilling holes.

I have most of the install of the winch mount and brackets but now I'm confused and have a dumb question. The mounting pattern for the winch is 9x4.5 and every winch I've ever had and any I can find is 10x4.5?? Did the mil warn have a special bolt pattern?

Thanks! I've been looking for a green one and can't seem to find one.

Great job so far, we're on the same track with our new hmmwv. Just a quick question. Since you're running the arctic kit would you want to sell the rear 4 man curtain that was on it in the pics.

Great. Where did you get the seal and glass?

Makes sense, I'll have to come down and check it out. It's about 2 hours from the house.

It says the Rally starts on Wednesday the 21st, does it start earlier?

Where is i is there a site with info?

What is the GA Rally?

Thanks Kurt, i'll check out a Glass shop. Didn't know they changed thicknesses.

When I picked up my HMMWV from GP it had a cracked drivers windshield. I've called around and looked online and no one will replace an H1 windshield? Even the Civ version?? Anyone with experience in this? Should I just get a piece of glass cut and put it in myself? I would assume it's the same...

Turns out it was the adjustment screw on the top of the alternator was turned down to 20 volts. We pulled into a truck stop, adjusted the screw up to exactly 28 volts and everything has been running just fine. Thanks!

We are planning on a trail ride October 18th in the North GA Mountain from Elijay area to Helen. All dirt roads. If you're interested let me know. We haven't got the trails mapped yet but the event is planned :-)

I picked up my hummer today and put a used alternator in it because the alternator that was in it was torn up. When I installed the new one it worked fine and was charging the batteries and also had a good output from the back of the alternator. Now, 7 hours later its.not charging. Any ideas or...