• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. N

    Oshkosh with Cummins 6 CTA 8.3 Temp sensor

    We sure did and sorry also for my delay
  2. N

    M101A2 and SR97 Problem

    Here in Louisiana all that has to be done is have a State Trooper inspect the trailer and give you the form stating that the unit passed the visual inspection and the bring that paperwork along with the paerwork from GL and they will issue your plate and the title will be sent to your home as I...
  3. N

    CUCV Dually

    As WARWAG said slight smoke upon startup is common as oil leaks around the valve seals when the engine is sitting like overnight. You also want the the engine to get up to operating temp. 170+ degrees and listen for any engine noises as GM engines will start tapping or knocking once the reach...
  4. N

    MEP 003A Oil..

    I agree Rotella 15w-40 is the best all around oil to use. FYI the 15W means that in the winter months when cold the oil flows like a 15W oil but has the viscosity of 40W.
  5. N

    Is there a problem with classifieds

    Thanks look forward to offering usable parts again. 6.2 pumps, lines, flywheels and other parts from the 6.2 to 6.5 engine exchange upgrade
  6. N

    Is there a problem with classifieds

    Thanks everone for the help. I love reading all of the post but it will take forever for me to reach 100 as I dont like to reply when I cannot be of any help. I guess I will have to enjoy the post and forget posting in the classifieds.
  7. N

    Is there a problem with classifieds

    When I get to the classifieds there is no where to click to add items to the classifieds.
  8. N

    In need of a breakdown of a sprag Transfercase

    Thanks everyone. I downloaded it from here and we are in the process of pulling it down. Thanks Again:beer:
  9. N

    In need of a breakdown of a sprag Transfercase

    I have a 1966 2 1/2 duce and in need of a breakdown of the transfercase (sprag) type. I have downloaded many of the TM for it but still cannot find a exploded view of it. Any help would be greatly appreciated Thanks TM-9-2320-210-34 is one of the set of manuels I downloadrd but cannot...
  10. N

    Oshkosh with Cummins 6 CTA 8.3 Temp sensor

    Just wanted to see if anyone else had any ideas as to where this sending unit may be located as we still have not found it and see no where on the head to put on. Im going to another Fire Department to look at another one around 50 miles from my house this week. Thanks for any help.
  11. N

    Oshkosh with Cummins 6 CTA 8.3 Temp sensor

    Thanks halftrack I will look in the morning as I have been crawling all over this thing and I will resume in the morning. I have sent a couple of photos of the truck for all. Thanks again
  12. N

    Oshkosh with Cummins 6 CTA 8.3 Temp sensor

    I recently purchased a Oshkosh aircraft refueler for our fire department it has a 6 CTA 8.3L cummins in it and I was wondering if anyone could tell me where to look for the temp. sensor as I have crawled all over the engine but have not found the sensor yet. Also does anyone know where I may...
  13. N

    New Process 218 Transfercase

    Thanks the constant 4 wheel drive will work out just great as we only race about a 1000 ft in the mud with only turning slightly. U shaped racetrack. Thanks again
  14. N

    New Process 218 Transfercase

    Here are the Numbers on the cases Model 218AM Assy# 12340 073 1 Serial # 4 15 93 1 1 8 20 90 1 2 12 90 1 Ratio 261 Model 218AM Assy# 5579 508 Serial 6 12 85 2 9 18 86 1 6 15 87 1 10 22 86 1 Ratio 261 Model 218AMG Assy # 12340...
  15. N

    New Process 218 Transfercase

    I need some help as to what these transfercases come off of or what they will fit. I bought 9 through GL and thought they were the same as the NP208s I got a while back. I live a good ways away from the bases and dont have enough time to look at all the items I want to bid on as is the case...
  16. N

    Hooks Texarkana question

    When you get to the truck entrance which is the first entrance you will go into that building and bring you DL Ins. and reg. and you can check your wepon there. Be sure to unload all firearms before entering the building.
  17. N

    Hooks Texarkana question

    You will need to call ahead and you will probably be speaking to Ms. Neely. As stated above take the commercial entrance then go to the stop sign and take a right. Travel 1/4 mile and you will see a smaill Office trailer on the left (usually many 18 wheelers waiting to get in and out). Park...
  18. N

    Need a Injector pump assy For Mep-003A

    I have a MEP-003 engine that I need a pump for . I used the refrence to the pump on the MEP002 as I also have a complete 002 running and I see that the pump has the 4 ports with 2 capped off. Thanks again everyone
  19. N

    Need a Injector pump assy For Mep-003A

    I am looking for a fuel injector pump assy. to fit the Onan 4 Cyl diesel. I have a MEP-002A 2 cyl onan gen set and it has the 4 cyl setup on it with 2 caps on the unused ports. I hate to buy another engine just to get the pump but I will if I have too. Thanks in advance if any one can help. I...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks