Search results

Glad your up and moving again. :-)

Check the air vent on the passenger side front gladhand to make sure it is not plugged also make sure that if it has a shutoff valve in place that it is OPEN so it can vent properly

Hello and welcome from Utah

One suggestion if you do choose to buy the Baofeng (I have one too to go along with my Yaesu Mobile & HT units) I highly suggest you spend the extra 6-7 dollars and purchase the programming cable for it and then use no cost "Chirp" for the programming software (free to download from...

Yes they are 90 psi for the wreckers

Congrats! I would love to have one of those.

Yes that should be it. Cummins Quickserve shows #3903924 for the timing pin Item #9 in the diagram

Double check your brake pedal (the brake might be leaking internally thus why you do see anything with soap water). Also check the CTIS drier

Hello and welcome. Have you checked to see if the 1600 tires your running hit the linkage or the hyd cyl?

Hello and Welcome from Utah.

usually the fix for non-blinking LEDs is to use the updated flasher unit.

Ken Tool makes them and there is several other makers that sell them on Amazon

Yep....Hill AFB is supposed to be towed/hauled. Fairgrounds good to go if drivable

Yes this show is at Layton Utah

Just be aware that your really looking at a 55 mph truck (the max speed that the tires are rated for). If needing an "OTR" type truck/tractor in a "MV" you should be looking at more like the 915/916 trucks.

You know I will be there :-)

Might be best to merge these threads?

Here is mine. The negative from under the truck was moved to the hole drilled in the floor under the switch. The Negative from the slave was bolted together and heat shrinked and it goes to the same post on the back of the switch. The Negative from the battery goes to the other post on the...

Yep Gimpy has it...Both battery strings need to be disconnected.

The improper shutdown sequence can damage things such as the PCB along with switch contacts and that might be causing the fuel stop to not pull in when warm.