Search results

I have a place in orange springs, it is a little bit east of Gainesville, fl and will be going on the market soon. I can send you pics and give you the address if you would like to get and idea where it is.

GULFWAY insurance is the company to go to in Florida. they may have an office in your state, check em out and see.

any 900 that is an A2 has the bigger turbo motor, and the CTIS system as well as the super single tires and wheels. after that, then a winch and a hard top are next on the list of want to haves. if you find one with all that, you have found a diamond in the rough, and it will be the platform...

:ditto:

the spring kit of a 5 ton will rarely flex, and will not look right under the the deuce. I have seen both systems installed, and but for space blocks used on the trailer spring kit, the only difference is the width of the springs. setting the springs on the out side of the frame widens the...

the heater in an A3 is mounted in the cab. the water hoses pass through the fire wall and connect to the valves like normal. the good thing about the heater in side under the glove box is the efficient use of space, and it get the heater out of the way of the injector pump and other components...

the document you found is used to classify the vehicle, the code classification of a vehicle indicates weather it will be repairable or unserviceable. your truck was turned in code "H" because it had reached it's MEL (MAXIMUM EXPENDITURE LIMIT), essentially, the army determined that this truck...

even with all the safety features you can think of, a M109 is little more than an oven on wheels unless there is an environmental control system installed (read A/C)

Driving around in a Bobbed Deuce is the most fun you can have with your clothes on!!!!

post a picture of your alternator so we know which one it is. there are two for the deuce, and only one is repairable.

check your filter canisters for air in them. I ran out of fuel the day I drove my truck home. it ran great, all the way up to 2600 RPMS. After I ran out of fuel, (BAD FUEL GAGE), I put fresh fuel in it and only got it to 2200 RPMS. got it home and after draining all the fuel filters, and...

Color, and that's all.

if you are going to use the spring kit from a trailer to get you axle mounted, then use the plate between the main spring pack and the helper springs. it is the right width, and has a hole in it already

MWO, Modification Work Order. after a problem is identified and reported to TACOM, a team of technicians address the problem and determine a remedy for the problem. the remedy is tested and after it is approved, an MWO is published, distributed, and implemented by the level of repair that...

you may want to wait and see if there are any regular uprights available. what you have, is a set from a high bow kit, and I am sure that there is someone out here in the SS world that would love to trade you for a regular set

drill a hole in it and fill it with muratic acid, it will eat the wood up long before it attacks the metal.

it is a shipping label. the truck once upon a time belonged to the 442 MP co. it came through the port in Kuwait. the units UIC was WPR8AA. the document has all the info about the truck, from dimensions, to bumper #. kinda cool.

could be the bearing in the top or bottom of the knuckle falling a part and causing the cast and camber to change radically. i would also check the wheel bearing to make sure they are not coming apart.

hand tight, clock the bar to allow feet and leg access, tighten again using your weight with one foot on the bar, recheck at 5 miles, and again at 10 miles. Lug nut checks are part of the PMCS, so you should never find yourself on the side of the road missing a tire and wheel unless you have a...

start with an m36a2, it has a longer bed and frame. swap out the bed for an M35a2 12 foot bed, and then you will have the room for a crew cab, and you will have a stronger frame than one stretched.