• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 800summit

    white smoke no start

    did you let it cycle a few times then try to start it
  2. 800summit

    white smoke no start

    check fuses! On the gm 6.2 it was common for glow plugs to go bad
  3. 800summit

    Wd-40

    Yes it works, I know the older WD40 does, not sure on the new formula
  4. 800summit

    Axle Vents: Clean? Replace? Relocate? OTHER Vents?

    BugEyeBear I did what your thinking and I routed the front tube up to the fuel filters and looped it over and tie wraped it. the rear I ran the tubing up into one of the holes in the frame and looped it out another hole. I did this using clear tubing with a 1/4 barbed fitting. Ran through...
  5. 800summit

    Where does your deuce live?

    I keep it in the woods next to the house and shop
  6. 800summit

    Wheel Bearing Temps High, grease & Preload Q's

    I just torque the inner nut to 50lbs then back off 1/8th turn put the locking ring on and bend it on the inner nut then torque the outer nut to 110lbs
  7. 800summit

    Fall New England Roadtrip (Deuce)

    Very nice! Thanks for sharing
  8. 800summit

    Members please post some fall pics

    Here are some from a month ago when I went hunting
  9. 800summit

    Wheel Bearing Temps High, grease & Preload Q's

    Yes this was done in the summer, I do not have access to a IR gun for temps, but I feel the hubs and the brake housing while on long road trips. I love this rig work on it all the time and take it moose hunting in the fall. You need to get geeasy and get to know your Deuce. You treat her...
  10. 800summit

    Wheel Bearing Temps High, grease & Preload Q's

    I use the Lucas EP Grease (red) I only torque the bearings to 80lbs then back off 1/8th turn. I have not had a bearing Hot just warm to touch, this is after hiway speeds @50mph for 10 hours
  11. 800summit

    Fuel burning heater duct hose

    I had the same problem, I used the metal 3"dryer duct Hose. works good with the artic heater, also is easy to instal.
  12. 800summit

    Took the Deuce Hunting

    grizcty yes we got 2 caribou one in 13c with a permit and one in 12
  13. 800summit

    Took the Deuce Hunting

    ida34 well bring your arsonal and take her to the firing range, I am speaking about the deuce of course:-D
  14. 800summit

    Took the Deuce Hunting

    Gunfreak25 I used a Winchester Model 300 at 200 yards. dont remember the grain.
  15. 800summit

    Took the Deuce Hunting

    That was a moose hanging off the winch. and yes he has lock out hubs and a locker in the rear.
  16. 800summit

    Moose hunt 2009

    frodobaggins the truck above has older 2.5 ton running gear on 16s I heard the truck broke while he was back in Moose hunting. They had someone fly in the parts to get it fixed. this is a home made hunting rig.
  17. 800summit

    Moose hunt 2009

    Snoplay it snowed up at Thumpers yesterday 2-4 inches
  18. 800summit

    Moose hunt 2009

    Pics looked great, I posted earlier last week on my hunt. Sure was good to see and BS about the rigs,and next years hunt. 800summit(scott )
  19. 800summit

    Road trip to Alaska

    Just got back from the hunt, sorry I did not see your message to PM you before I left. You can see some pictures on the "took the Deuce hunting " in the Deuce forum. Scott
Top