Search results

http://www.steelsoldiers.com/auxiliary-equipment/94526-mep-016-sx460-avr-shuffle.html#post1210830

http://www.steelsoldiers.com/auxiliary-equipment/71973-mep-016b-sx460-voltage-regulator.html

My current state is sober.

I'm sure you could sell the ASK for a decent sum.

I've never had a 24V battery (or 12V) source connected to my 016E or 016D. 016B is Onan powered, no pull rope. 701A is 016B with ASK enclosure. 016E is 10HP Yanmar upgrade kit for 016B, with pull rope and sometimes in 701A ASK enclosure. 016D is 7HP Yanmar Diesel upgrade for 016A gas gens...

Resurrect this one. Did you ever find out what was up with your 016D charging systems? I have a theory: Maybe they tried to use them to charge 24V batteries via the NATO plug and burned them up?

Can you just disconnect the regulator? I've run my 016E without a battery. I've never run it with a battery. I don't think it will hurt anything but do it at your own risk as I am not sure. My 016D has a charging system, I think. It runs the electric pump. See pic. Isn't that a rectifier...

Post pics. If it is air cooled Diesel 5kW then it is probably a MEP-002A. If it is milsurp there should be a tag on it.

No problem. Post pics of your setup if you can.

Aircraft Spruce is a good source for Facet pumps, I think: Facet Fuel Pumps from Aircraft Spruce

http://www.steelsoldiers.com/auxiliary-equipment/78999-mep-016d-240v.html http://www.steelsoldiers.com/auxiliary-equipment/78999-mep-016d-240v.html

I think this has been covered in depth. Did you search?

You will probably find a minor issue with the gen set. If you are very lucky it will run and make power with just new fluids and filters. You can get a spin on filter adapter from another SS member. The TMs are useful. The 003 is a good gen set, but kinda loud. Keep this in mind when...

Wow, a free 30kW gen? Bring that to LA. I'll take it.

A "200 Amp plasma cutter" will usually draw around 100 Amps AC at 208V, 3 phase. I think anything more powerful than that would step up to higher voltages. The higher voltages are better for allowing use of smaller gauge wire.

What brand/model is that plasma cutter? Is your guy scrapping battleships? 200A 3 phase is A LOT of power.

We should get together on the upcoming 016s at Ft. Polk. I plan to bid on a few but I don't like the idea of bidding against you guys. Shoot me a PM if you want to discuss.

I think the blower wheel nut can be reached through the end.

Just being realistic. Worst case is locked up motor and burned up stator windings. In that case you can probably part it out and if lucky break even. But, chances are slim that both ends are bad. They quit using them if the motor is bad or if the gen head is bad. So, it would be very rare...

First to break and most likely to be first taken from a donor unit.