Search results

Ok, your headlight switch...I can see in the picture it is turned all the way counter clockwise. It needs to go the other way to get the dash lights to work. Clockwise. I took a pic of mine in a cab I have out back. Can see the spring the bar should be touching to make those dash lights work. A...

I was wrong about the temp light it comes on when I turn the engine over then it goes off.

My low coolant turns on and goes off when it starts, the temp light does not come on in mine.

So we got 3 new mechanical pumps today! I found them on eBay as well and ordered 2 more, which turned out to be from the same batch as others selling them for 8.50$ each. He got the time down to about 45 minutes. What I found with the napa pump that didn't work was there was no spring on the...

So that hose is supposed to be bolted to the upper radiator metal bracket support on the rad shroud...but can go anywhere no biggie...the rear axle should have one too.

I would think basic stuff like check fluid level, I don't think color would be an issue if you broke a hard part inside, make sure the transfer case linkage didn't fall off and not work the gears....weird stuff happens...have someone put it in gear with the feet on the brakes and see if you can...

When you google the part number click on images and there is one on there for 7$ each, mpp parts.

I ordered mine online to get the 3.5 size. Not a big deal at all though as anything that flows will be enough for a return line.

Are you looking for the sticker that shows what the switches do or the flat metal bracket the switches are mounted to? I have seen that sticker on ebay and I think a guy on here and the metal bracket I think Hillbilly wizard has those online as well.

I did that felt return line on mine but not the other ones. I'll have to figure out what size that is and get some.

Any chance you popped the transfer case into neutral?? If you go into D1 does it do anything? When you say no action does it just rev up like a clutch car with the clutch pushed in? As far as the other driver, it really depends on how much of a trans drop they were doing to figure if they did...

I'm just gonna throw this out there that since that tach is not stock and not in the tm I'm not sure many people have any clue how to fix that. Is the VDO website have any diag or tech notes on how it is hooked up and how it works? The voltage should not be 32 volts as well...way to high. If...

So he had a fun morning swapping out his lift pump. He did it all by himself laying across the top of the radiator. He got under for the fuel lines but fished the bolts in and out from up top. To be 17 again!! Took about an hour. Unfortunately, the new one didn't work at all, so I hooked up an...

That does look like the correct isolated ground style you need. Yes if you test the ground it shouldn't be there on the case as well. One thing I would suggest, if you haven't already, is hit the tech sticky on how to diag these alternators....there is a great one in there that will walk you...

So it happened again!! Dragged one out of the weeds that had been sitting since 97. 2 tires were completely gone, but 2 still had air in them. It does not have a tailgate, so a raccoon family moved in and ate the rear seat! Front driveshaft is bent. Has a very nice rt524 radio mount and wiring...

That's tough to have to deal with. Sometimes I think half my brain is grey matter with no connections at all. TBI sucks!! I order most everything online and pick up and sometimes get it delivered....I can keep track of what I got going on much easier. Sounds like you put the parts in the...

I figured they can use either so I went with the dot 3 since it's very cheap and easy to get. I didn't rebuild anything first just used my pressure tank to push it out! Yes I would rebuild my calipers too, that's cheap and easy as well.

That's chunky!! First thing I do when I get one of these is flush it out and put dot 3 in them...then flush them some more every year.

I think he's using those as an example of what the backs look like.

I wish Amazon would let me copy a link but since I already got one it won't....but I got a this Lisle 65750 Windshield Tool copy that in Amazon and it's 5.60$. Copy that and it should come up in the Lisle tool store.