Search results

You can use one of the open 12v slots in the fuse box, http://www.steelsoldiers.com/showthread.php?84687-where-to-find-12-volt-power. As far as an antenna, I just picked up one of the 2ft rubber ones at Advanced Auto and it works fine.

Nice:-P

Ok, so after searching the site and the TMS, I believe I need TIMKEN Part # 5208(seal with replacement brushing, found on this site) to fix the leak in picture one. In picture two, I’m thinking I need a rear differential pinion seal according to TM9-2320-289 134P, PN 458859, Seal, Plain...

If you could be a bit more specific, and maybe a picture or two, I can try and help you out. I had to do a good bit of electrical repair/replacement/pm recently with mine so it's all still fresh on my mind.

Looks great man!

Thanks for the response cpf240. So, do you think the reading on my gauge in the picture is fine(the last pictureof it), or does it need to be investigated further?

I have a few issues. Issue one, so when I start my M1009 the Gen 1 light stays on, sometimes, however, it will go off after pressing the accelerator lightly. Reading through the TMs I'm thinking I need to adjust the idle speed, however, I'm not sure how much to adjust to get to the called for...

Welcome to the site. I’m new myself, but can tell you that the TMs will become your best friend, and they make for great bathroom reading material:-DAlso, learn to use the Search function, most likely any issue you find has already been covered. From what I have learned, you want to make your...

Thanks for the invite and the possum offer, if I get a chance to go get my tag before then I may drive it up there, if not, I may just come on up in another vehicle.

Thanks, and I may take you up on the offer for help down the road, your right, guys aren't that far away.

Thank you sir. I wired everything back according to the diagrams and what I read on this site, so it is stock 24V now. I don't have any pictures of the old wiring, wasn't much there to take pictures of but some burned and cut wires. The truck belonged to a local Fire and Rescue squad, then...

Hello All. This is my first post, thought I would share pictures of my new to me CUCV. It had been sitting for three years, wires and such had been cut, and had a bad passenger side alt. But after a days worth of work and several hours reading through the TMs, I was able to drive it home...