Search results

Ok did a long road test today to work and to run some errands... Got to work and let her cool down then shut her down...she ran great.... then I get out and chock her and do a quick walk around....Did I mention I degreased the engine after getting her running....not while she was hot of course...

Interesting......I will remember that.. Lee I would wait a little bit before pulling the in-tank pump....It may take a while to bleed off the air with just the intank pump...it took a minute or two for mine....I left the bleed port closed for a minute and then opened it and it hissed and...

You bet!! I understand the temprature thing!! I am from north GA and if I could work in the mountians I would in a heart beat... Allergy season is here too!! This is the worst Allergian city in the Southeast! Got the deuce fixed it seems took it out for a 30 min road test..took the neighbor...

ok thanks for schooling me...in tank pump is running at least making a sound in the tank cause tank is vibrating too, and I found a slow leak at the primary bolt on top.....didnt notice it on initial leak check last time cause it was under the bracket and alt and I was looking from below... I...

Found troubleshooting guide manual on your issue... TM 9-2320-209-20-2-2 Pg 26-18 and on.... I know this may sound silly but did you check the bulbs yet? pull cover and have wife step on brakes and check for power at bulb....if no power trace wires back till you get power when brakes are...

Welcome to the club and just cause you said you were gonna post pics wont keep us from posting nopics Sorry!! Had to do it! it is required by law here!! Again welcome and post away!! I would start by downloading the manuals for your truck in the resources area from the Tech Manual list...and...

I have put something like 11000 since July 09...I have driven mine to work 5-6days a week and with a 600 mile trip at Thanksgiving!! I have the box with the pad on it but its more like a whoppi cushion than a seat...

Ok...got distracted and finally got back to work on the deuce....here is what I have found... I am certian it is not the filters now...dropped them and checked...they looked ok...and reinstalled and leak checked...well while trying that she got so much air in her that she would cutoff right...

Congrats Bobber hope all recoveries go this well!! Enjoy your new ride and post lots of pics doing cool stuff!!!:grd:

Welcome to the site...from Augusta!!

Ok I will investigate today..

Ok here goes.....My deuce is starting to act up...I keep having to bleed air out of the fuel system... first it started after I changed the fuel filters then went away after purging lines well..... then about every other day it would need a little bit drained right after start up... yesterday...

Dito on the pics!!! Welcome from Augusta, GA

If it is mothers day that counts me out....momma wont let me have a kitchen pass that day!!aua

welcome to the mix....you are sure to want more than one before your done :grd:

:funny:

Welcome to the site!! Hope to see you at the GA rally!! I head down that way sometimes...my dad is in Townsend.....near harris neck island...

Well Regulator, since it was your truck....Your Welcome......yeah that was alot of junk in it... It was about a 3 hour job in all....can't really tell cause I ended up having to stop a couple times to deal with the kids.... But it was not frustrating which is awesome!!! As to using a...

Ok here is the post you have all been waiting for...... BALANCER R&R on a M1009 First order is to get TM and get torque data special tools needed Have a prybar 18" and 24" would be good 15/16" socket 1/2 breaker bar or two and rachet Torque wrench 2x4 and hammer balancer puller Park...

I will let you know by the weekend....my sources say you do not need to remove radiator....the fan may come off for ease of access but should only need to pull pulley and then the balancer.....requires a three hole puller to remove....and divine intervention to install stright...at leats what I...