Search results

I got the conversion lights from hella, they are way better than the cheap conversions you can get in the auto parts store, I paid $130 for the glass and I am also running 90w/120w bulbs with a headlight brightening kit(its a auxillary harness that draws power directly from the battery, the...

you wouldnt be able to use the same power source for the lights themselves, but could use it for triggering the relay. you will need to splice in a second power connection , since the factory setup for the lights is that all the power runs through the bo/service switch and then to the bo switch.

you could do that for sure, i wouldn't use the original switch though, unless you use a relay to operate the lights.

tsmall, i have a whole engine electrical harness if you end up needing to replace stuff, I'll check to see if i have the light harnesses. you may be able to get those from the parts thread on here.

reverse in the transmissions of most trucks (someone confirm this) are straight cut, so you have stronger gears but loud at speed.

http://www.stazworks.com/rims.htm

RE: Wheels for 12.00R20 XML you will have to get a 20" wheel and have centers made for your wheel pattern. Dont get them from usa6x6, he's burned a few people on here.

how much of an improvment are the new shocks, I'm considering getting them

what was on when the fuse blew?

hey, parking in the grass again, you trying to make it never grow. you have a rolling weed killer there. [thumbzup]

thats a great price. If i didnt have a spare already..... underdog, get a ford starter relay, then trigger it to send juice to the starter solinoid. that way you can get a cheap switch and never have issues with it again.

yup, a month too late for the ferry, darn there goes that idea. I'll just drive through the outskirts of chicago, since he's in madison, it would add a lot of driving to go north considering that i am near the southern end of michigan.

check to be sure that the machined surface that the starter mounts to on the block is square to the flywheel. also be sure you have the correct bolts, there is a commone bolt that you can get at the auto parts store that kinda fits. the issue is that this bolt is too long and will bottom out in...

if the starter had a dead short, it can cause all sorts of grief.

thanks for the props kenny.

did he pull them for a diesel blazer? I know that the front shocks on my truck are short compared to the rears. Do your front springs have a negative arc? (meaning the center is the highest point of the spring) If not then you have a mild lift on your truck.

the front springs can be narrower on the 1/2 tons. the one ton runs a wider spring up front. measure it and be sure you get one with the same width springs.

if you click the qoute button at the end of a persons post, you get a new reply window with all the proper formatting and that persons text already qouted.

RE: tow lack of weight is what will make a trailer bounce.

I will be heading over to Westech's house in WI to get my Deuce. I'll be taking the ferry across the lake to avoid the traffic in Chicago. I am planning for the weekend after turkey day. so I'll be leaving my house on the 23rd and hoping to be back home sometime on the 24th but leaving the...