• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. doghead

    4A032 and 2A016 float replacement or sealer?

    I have not tried one myself, but others have posted that they have used, http://www.oregonpartsstore.com/49-009.html
  2. doghead

    M-817 brake problems

    I'd start with a full disassembly and inspection of the brakes. From there, a full adjustment(outlined in the -20TM).
  3. doghead

    Suppressor on bus bar

    You(personally) need to test to see if the ground stud has continuity to the case(exterior). This is how you test for isolated ground. Have you? If you have made smoke appear anywhere since installing them, all previous testing is invalid.
  4. doghead

    What's you favorite upgrade?

    Do they survive continued submersion in water? Both bearings and electronics?
  5. doghead

    M939, what are the air lines on the park brake doing?

    So, the question is, did the OP mean air is sounding continuously or just for a few seconds.
  6. doghead

    M-817 brake problems

    Brake fluid? How long has it sat?
  7. doghead

    M939, what are the air lines on the park brake doing?

    Look at the parts TM?
  8. doghead

    M939, what are the air lines on the park brake doing?

    Just get under the truck and find what is letting air out.
  9. doghead

    M939, what are the air lines on the park brake doing?

    It does, but through a relay valve, Your valve may be bad.
  10. doghead

    24v inline fuel pump

    I just cut a section out of my original line and installed the pump with NPT/compression fittings.
  11. doghead

    24v inline fuel pump

    A short pre-made brake line will thread right in to that fitting.
  12. doghead

    M 925 Lube Question

    Don't forget that there is a spindle bearing inside the spindle that needs lube and periodic cleaning. Item # 5.
  13. doghead

    Advice on simple m818 mod

    I'm reading it as he wants to just go to single tires(stock size) on the rear axles. This would require a hub flip to keep track width as close as possible
  14. doghead

    M816 Wrecker Won't Start

    You can test your battery cables with an ohm meter.
  15. doghead

    How to adjust door for M35A2

    Look close and be sure they are installed correctly(compare to a door that fits well). I think I recall that the hinge point is not centered or that there was a difference from side to side. I cant remember the details now but, the last time I swapped some doors I remember an issue similar to...
  16. doghead

    How to adjust door for M35A2

    Did you use your original hinges in their original positions?
  17. doghead

    Suppressor on bus bar

    Not sure how you tested the alternators but you need to understand that a standard "bench test" will not always find a bad diode trio. A bad diode trio will drain the battery when the vehicle is not running. It can still pass the charge"output test" with a bad diode trio. Also, did you test...
  18. doghead

    Normal top speed for Deuce

    Congrats! I'm glad to hear he was able to find a buyer and one that loves it(He sure did).
  19. doghead

    What damage can occur if a M936A2 is towed without transfer case in neutral

    Have you checked all the lugnuts yet?
Top