Search results

I have A 71 Multifuel. My current engine has a crack in the number 6 piston. Behind the sleeve. aginst the fire wall side of the engine. It had one in the sleve but I put a new in. I did not tourqe the back two bolt down as tight so it would not make the crack bigger. Till I can find a diffrent...

I know In OHIO if the trailer weighs less then 4000 lbs . I do not need a title for it . Just go to a local weigh station, or grain elavator weigh it bring that slip to the BMV.

Well I got the new sleeve in and head gasket. looked a little harder at it before I put it together. Found that the back side of were the sleeve goes in on the #6 block is cracked.:-x####:-x Well I'll just put it back together and put less preasure on the back two head bolts. Then put some...

Did some more testing. blow air into each cylinder head one at a time. Got to #6 made my radiator bubble. found the leak. The sleeve has a hair line crack in it 1/4 inch down from the top. Time order a new sleeve. Priced close to $85 to $99 for one. Hopefully that will fix it. Happy Holiday...

Well I changed the head gasket's set. But still getting blowby in the radiator. What else can I check to what the problem is. Could it be one of the injector cassing? Truck run good. So at a loss of what to do next.

Is this the light you are talking about? Trucklite Military LED Lamps

Doing a little more investgation. there no sings of water in the oil, but I see extra amount of moisture in the valve cover . A lite milkey hase. On the cap. What is your thought's. What to check next?

It just keep bubbling from when I start it till i shut it off Even drove it down the road it then open it slowly still bubbling. Wish I had a x-ray to take a picture so I could know that is the problem. I'am shooting from the hip.

Well I flushed out the radiator. That when it seem to get worse. The radiator was blowing it's stack. Got a new radiator cap.didn't help. Took out the thermostat. The radiator still's bubbling. So I guess the head gasket is bad. Where is a good place to get a gasket set? What is the best TM to...

I found a voltage-reducer. I was woundering if any one has treid one. Here is the link of what I found. OKoffroad.com Stuff - 24-12 Voltage Reducer Thank you service men & women for serving our country.:-D:-D:-D

You need to have a water ballon launcher. Let them lauch the ballons at the truck. Kinda like if some one was throwing garnads at it. Here a like to what launcher I'am talking about. water balloon launcher slingshot water balloon slingshot, blow guns, gags, pranks, flasks, rubber band guns...

Sent EUC in on the june 26. just got paid in full back today july 2. Is that a record or not.

No it does not seem to have any efect on power. because it a stright threw muffler.and I can talk to the person seating next to me with the right window open.

I love my hearing so I put a muffler on my deuce. What do you guy think.:?: I now the sound of the deuce sound good but I would like to here when I'am 99 years old and still kicking. It is a stright threw muffler 8" x 30 ". It fit threw were the other muffler was. Mounted a bracket off the...

Congrats.:-D When I got my duece home I got farm plates on it about $150. It was alot cheaper than standerd plates. Also on insurance farm use. I pay about $ 140 a year with that . Have a good one safe drive home.

Thanks Guy hope to see you there. Findlay , and Troy Keep Haven fun

How do I find out when rallys are and times

Hi Newbe From Ohio Looking for a cd on TM 10 , 20 for m35a2 I see alot on diffrent sites. But which one are good ? Where can I get It. Thanks for the help. Keep the dream Alive.:-D

In OHIO anything that hauls over 1 ton can't have a personalized plate. I was bumbed out.