Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Guys, ive just purchased a Prm -34 test set from the states and apon applying 6 volts on the self check position all i get is the mhz led lit, no numeric led..? The unit itself looks NOS..
Im at a dead end here, waited a long time to purchase one and its not playing ball.
Is there anyone on...
I recently came by some NOS radio parts and am keen to find out just what they are for (which radio?).
I have googled the part numbers but it only tells me where i can buy them trough NSN specialist websites.
I have about 30 of the network filters in all different part numbers, can anyone tell...
I have purchased over a period of time a prc-77, am-2060 amplifier and mt1029 mount to compliment my rt-524 and r-442 in my M1009, my problem is trying to find the elusive drivers side radio mount.
Can anyone set me onto a source new or used i aint fussy, thanks......
Guys, just spent 40 mins searching trying to verify if this is the correct temp sender for my M1009 with no luck, can anyone steer me right, thanks...
AC DELCO part no. 1#213-72
I have a Greek rt-2841 25mhz radio missing its xmode plug.
Will a plug from a rt 524 work in its place?
Also Im at a dead end trying to find modules #36,37 and 40, anyone help? Will pay for same and ship.
Many thanks, Irish Steel Soldier.
Been collecting the various items to get me going on a first time on board air system over the last few months.
I used a Viair 400c which has 33% duty cycle and a respectable 2.54 cfm,
a 5 gallon air reciever i liberated from an old army truck and a 6 port manifold and various fittings from my...
I have just wired up my 524 set and ran the cable (cx-4723) to my intercom box (C-229) and from this i have connected a LS 454U loud speaker and a handset H-250/U.
My problem is i cannot hear myself transmit in the front loudspeaker or in the earpiece of the handset at all, the volume is up and...
I have a r-442 0n the way to complement my rt-524 install in my M1009.
My question is can i use my spare mx-6707 antenna to receive on the 442 and what way is it wired??
I know a ab-15 is the right ant but it would save me some coin....;)
Following on from my last thread http://www.steelsoldiers.com/cucv/89431-no-oil-pressure-after-rear-main-seal-changed.html
I need to order a head gasket set for my 09, can anyone steer me in the right direction as to the type of kit i need? bearing in mind that while the heads are off i will...
I,ve no oil pressure after doing a rear main seal and timing cover seal change, did everything methodically but on start up no oil pressure:(
Turned off engine, checked oil sensor connection, all good, restarted engine left her for no more than 30 secs and i heared a sound like woop woop coming...
I have just bought the radio shelf table and the correct mount (MT-1029/VRC) for my radio (rt-524) to go into my 09. :)
My question is...... there appears to be another part to the puzzle i dont have, its this adapter plate, B4030088??
Ive googled it but cant get a picture of it, ive seen other...
Ok, i have searched and read previous posts and think i have an understanding on how to fix this problem....
Had two gps go bad so ordered 8 ac60gs from the good old USA, installed them today, fitted new insulated female spade connectors and heat shrink for good measure, so ign on...
I bought this new old stock from a reputable seller on fleabay to repair a leak on my timing cover behind the balancer. Just a bit worried it looks pretty big??
I took the pic of it and the military part numbers on the package, can anyone confirm its the right one??:-?
Who is a Redneck mechanic when the situation allows??
While installing a replacement steering arm balljoint i had trouble with the shaft spinning on itself as i tightened the nut aua even my dad with a big ass bar couldnt exert enough downward force to stop the bugger from spinning...
I have an unusual oil leak in my transfer box output shaft.
The seal at the box is fine but im losing oil around the u joint area??, it throws out oil under the floor at that spot
See the pic for a better explanation.
Any ideas guys??
I have my eye on a set of 15" slotted black steel wheels, im hoping to upgrade to 35x12,5x15 tyres also.
My question is what width should i go for and with what backspace also.
Im looking for a "chunky" look but not sticking out too far either:confused:
Was browsing this site stateside... Wheel...
My 09 is currently running on 33x12.50x 15 tyres with a 4inch Rough Country lift, since they were fitted i thought they looked a wee bit small??
Im thinking of splashing out on some 35x12.50x15 tyres, either bf goodrich mud km2,s or Hankook dynapro mt.
My question is would this be the size you...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!