Search results

Just ordered a harness from Kascar and wait to start light we will try that first thanks guys

I'm slowly working on getting my new 93 M998 ready for my move to York, PA. Currently my truck has no wait to start light that comes on and has no glow plug firing. It does have the KDS smart start box. My question is where do I start to solve this problem? How do I check the box itself and the...

What do you guys suggest I look at first and begin to replace on these vehicles? or is it just replace all fluids, fresh batteries and so on and wait till something goes bad?

This is a lot of great information! I'm glad to here I did well as this is my first HMMWV purchase. This is why I love this community.

I just bought a 1993 HMMWV from gov planet. Item #872061 It states that it has a 6.5 liter engine, but my research says that they didn't include these till 94. Am I wrong in this and it could have a 6.5. Any help and experience is appreciated.

Today I turned my truck off and heard an audible hissing noise in the area of the drivers side wheel well. It is definitely an air leak and it seems to only be draining air from the secondary tanks as the secondary gauge is the only one losing air pressure. Do you guys have any idea what air...

Don't have manual on hand I am at a mud bog.

Quick question can the front axle be engaged on an m923a2 while moving?

I am probably straight piping mine soon. My muffler is perfect I could sell it to you if you still interested when I'm done.

So I have a question for you guys. My oil pressure on my m923 is really low at idle when at operating temperature, the gauge is reading i would say at about 5 psi maybe it almost looks like its zero. But when i drive it the pressure is in the normal/ middle range on the pressure gauge. Is this...

I did not have the second lever in the correct position. My deuce had the push button system not the 3 lever like this M923 an I thought it worked the same way thanks for the help.

Thanks for the suggestions I will try them today and get back to you all.

So, I went to drive my truck at night for the first time and I turned the switch over to service drive and all of the lights came on except my headlights. Is it possible both of them are burnt out or should I be looking somewhere else for an issue? Any hep is greatly appreciated.

Thanks for all of the help guys. I checked the pedal today and sure enough that was it. the pedal was really stiff in my truck and it was not returning all the way to the neutral idle position. I am going to lube it up and see if that fixes it.

I appreciate the help I'm just throwing thoughts out there. And to answer your questions no it has never died and it starts with a simple turn of the switch and I am not holding down the gas pedal or anything when I start it. I will replace the filters and stuff and provide an update. I am just...

Ok, this maybe my limited mechanical knowledge speaking, but if it was sucking air wouldn't the engine cut out or sputter do to air getting in the system?

Filters were changed by army 2 years ago. I am in the process of changing them myself now. And I filled the truck up with diesel when I picked it up and drove it home and the fuel didn't look bad then.

This may be a stupid question but I have been doing maintenance on my M923A2 such as oil changes and trying to get the CTIS to work while I wait for title to come in. I noticed that my engine upon start up idles very high around 1000 RPM. My question is, is this normal is it something these...

Do any of you guys have a part number or suitable replacement for the rubber bushings between the front of the cab and frame?

I really couldn't find a thread for the differences between models of truck so I was wondering if any of you guys knew, and does anyone by chance know the filter part numbers for an M923A2 series of truck?