• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by POOR WHITE BOY

  1. POOR WHITE BOY

    M1031 - 4L80E conversion ??s

    I have a 1991 v3500 with the 4l80e and np205 combo. I have also installed the same combo in my 1986 m1028. If you need any photos or correct part numbers for the swap . Just send me a pm
  2. POOR WHITE BOY

    M1008 Factory wheel/ tire size

    x's-2
  3. POOR WHITE BOY

    Cracked np 208

    read my quote - it says 1981 thru 1984 is the correct adapter 1981 thru 1984 have a tall adapter with 2 rubber mounts 1985 and newer have a short adapter with single rubber mount
  4. POOR WHITE BOY

    Cracked np 208

    You can find one on e bay. If from a civilian truck it would have to be from a heavy duty 3/4 ton - 8600lb gvwr. The light duty 3/4 ton models did not have a turbo 400 . 1981 thru 1984 model years
  5. POOR WHITE BOY

    need an overdrive what should I do.

    4l80e not cheap - but well worth the extra expense . Or find a donor truck . I have it in two of mine and love it. My 1991 crewcab came with it oem and i put one in my 1986. Both have a np 205 behind them :d
  6. POOR WHITE BOY

    85 1009 trans

    No lockup converter
  7. POOR WHITE BOY

    Cracked np 208

    You need 32 spline input if you are running a turbo 400 transimission
  8. POOR WHITE BOY

    Cracked np 208

    I run a np 205 in all my rigs - i have seen alot on np 208 and np 241 cases used for truck pulling/sled pulls. They hold up fine when built correctly. Everyone that i have seen break was because of a driveshaft that was the wrong length . The most important part of any case you use is to...
  9. POOR WHITE BOY

    Lifting Issues with a 1008...

    You donot need to lower your transfercase with a 3.5 lift kit. I put a steering block on mine when i lifted it - goes on the top of driverside steering knuckle under the steering arm. Installed new studs with this to.
  10. POOR WHITE BOY

    Revamped M1031

    Flat bed looks really good - nice job
  11. POOR WHITE BOY

    N Arizona M1028 Build Thread

    I would put new motor mounts and freeze plugs as well why you have the motor out
  12. POOR WHITE BOY

    N Arizona M1028 Build Thread

    Radiator shop down on dixie highway in lake worth - i forget the name of it but they do good work
  13. POOR WHITE BOY

    M1028 correct receiver hitch photos

    This is a class 3 hitch - 2 inch receiver. There are no part numbers on it . I am waiting for the paper work / receipts for these trucks so i can find out where the hitches were bought and maybe a part number. I have 2 m1028 trucks - they both have this exact hitch on them . Bolts up...
  14. POOR WHITE BOY

    What's with the maroon colored interior?

    Great info
  15. POOR WHITE BOY

    M1028 correct receiver hitch photos

    I will look for a engraved part number when it is cleaned up - there is no label with part number also - the bolts shown are not the correct bolts
See more
114,090members
167,074threads
2,352,219posts
2,577online users
Top