• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. POOR WHITE BOY

    M1031 - 4L80E conversion ??s

    I have a 1991 v3500 with the 4l80e and np205 combo. I have also installed the same combo in my 1986 m1028. If you need any photos or correct part numbers for the swap . Just send me a pm
  2. POOR WHITE BOY

    M1008 Factory wheel/ tire size

    x's-2
  3. POOR WHITE BOY

    Cracked np 208

    read my quote - it says 1981 thru 1984 is the correct adapter 1981 thru 1984 have a tall adapter with 2 rubber mounts 1985 and newer have a short adapter with single rubber mount
  4. POOR WHITE BOY

    Cracked np 208

    You can find one on e bay. If from a civilian truck it would have to be from a heavy duty 3/4 ton - 8600lb gvwr. The light duty 3/4 ton models did not have a turbo 400 . 1981 thru 1984 model years
  5. POOR WHITE BOY

    need an overdrive what should I do.

    4l80e not cheap - but well worth the extra expense . Or find a donor truck . I have it in two of mine and love it. My 1991 crewcab came with it oem and i put one in my 1986. Both have a np 205 behind them :d
  6. POOR WHITE BOY

    85 1009 trans

    No lockup converter
  7. POOR WHITE BOY

    Cracked np 208

    You need 32 spline input if you are running a turbo 400 transimission
  8. POOR WHITE BOY

    Cracked np 208

    I run a np 205 in all my rigs - i have seen alot on np 208 and np 241 cases used for truck pulling/sled pulls. They hold up fine when built correctly. Everyone that i have seen break was because of a driveshaft that was the wrong length . The most important part of any case you use is to...
  9. POOR WHITE BOY

    Lifting Issues with a 1008...

    You donot need to lower your transfercase with a 3.5 lift kit. I put a steering block on mine when i lifted it - goes on the top of driverside steering knuckle under the steering arm. Installed new studs with this to.
  10. POOR WHITE BOY

    Revamped M1031

    Flat bed looks really good - nice job
  11. POOR WHITE BOY

    N Arizona M1028 Build Thread

    I would put new motor mounts and freeze plugs as well why you have the motor out
  12. POOR WHITE BOY

    N Arizona M1028 Build Thread

    Radiator shop down on dixie highway in lake worth - i forget the name of it but they do good work
  13. POOR WHITE BOY

    M1028 correct receiver hitch photos

    This is a class 3 hitch - 2 inch receiver. There are no part numbers on it . I am waiting for the paper work / receipts for these trucks so i can find out where the hitches were bought and maybe a part number. I have 2 m1028 trucks - they both have this exact hitch on them . Bolts up...
  14. POOR WHITE BOY

    What's with the maroon colored interior?

    Great info
  15. POOR WHITE BOY

    M1028 correct receiver hitch photos

    I will look for a engraved part number when it is cleaned up - there is no label with part number also - the bolts shown are not the correct bolts
  16. POOR WHITE BOY

    M1028 correct receiver hitch photos

    Here are photos - fits /was installed on mine - i can take some installed photos after it is sand blasted and painted. This fit my m1028 and should fit all chevy gm trucks from 1973 thru 1987. Will not fit blazer or suburban. This fits perfect with all military brackets, lift ring mounts...
  17. POOR WHITE BOY

    th400 output question

    yes it is gutless by todays standards but back in 1987 that was a very powerful rig who did the sas on your hd ?what year dana 60 did you use ? thanks , hal
  18. POOR WHITE BOY

    th400 output question

    No iam good thanks . I remeMber when they came out - brand new - they were very fast compared to the 1986 models with a carb
  19. POOR WHITE BOY

    th400 output question

    Is that the 1987 v30 in your sig ? Does it have/still have tbi ?
  20. POOR WHITE BOY

    Broken Dipstick

    They are still available also at your local gm dealer
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks