Search results

Nice looking truck!!! Was the tool box locked? All the trucks we have picked up at Fontana have had no tools or fuel.

Thanks for all the info. and help!!

I had installed a PTO on my deuce about three months ago and it would not go in all five detents on the shiftier, so I took it off and was looking at it and I noticed that it would not go in to all five detentes. So I did a closer look and noticed the shiftier gear was not going all the way over...

Nice job!!! Cool idea.

If is not hard, but you need to read the TM for sure on the winch use and for sure DO NOT TRY TO USE IT BY YOUR SELF. Bad things will happen if you try to use it by your self.

That was good thinking!!

Here is one. http://www.oshkoshequipment.com/details.cfm?ProductID=1917&pid=17&TruckCat1ID=15&TruckCat2ID=17

I think the A0, A1 and A2 are the same p/n MS51071-16 Erick's has them most of the time, I just look and he does not. you may email and ask when he will get some in.

Doghead, Thank you!! I saw that but I did not know if that was the seal for the outside or not.

Anyone have an idea on how to find the p/n for the seal. I have looked at three rev. of the parts manuals and they not show the seal or shaft on the transfer case drawing.

What he said, you will be a lot happier. :ditto:

There is one at the other end also, I think! I still think you have an air leak in the fuel line some place.

The tank just has two baffles in it, if that is what your asking? I would not think the air bubbles would be a problem with more then 10-15 gals. in the tank. You maybe getting air in some other place.

Starting to look like new!!:)

Nice looking truck!!!

You need to pickup the truck first then send in for the SF-97. A Bill of Sale will come with the SF-97.

I just checked and the spacing is not the same for the dump seats and cargo trucks. Will not work.

I am the one that did the post you listed and I do not think the Dump truck seat will work in a cargo truck (to short for one). I think the leg spacing is not the same. Also the seats just unhook from the back and then hook into the bed of the dump. I will check the spacing this morning.

I have a Fluke also and it has been banged around,and dropped for 25 years.

Here is a post about the problem I had with my M923A1 fuel tank. http://www.steelsoldiers.com/showthread.php?79327-M923A1-losing-prime&highlight=fuel