Search results

yes, thank you WILL for you time, all the PMs and the phone call, also the your idea of the clear fuel hose really helped in finding the problem, i also put a spring on the emg. fuel shutoff to pull it back open when used as you suggested, thanks again the idea behind the pullback spring is if...

if anybody is interested , the after market info for this valve is. 24v fuel solenoid the pn# 6997324 made by bepco, inc 2475 s.stratford rd. winston-salen, nc. 27103 even though it says fuel solendoid, it is the whole valve i paid $42 plus tax at the local big truck parts shop, this was...

RE: Re: RE: Re: Deuce Forum = A Joke! since we are on this subject, another thing is the "read the tm", that being said as we all know the tm section is a nightmare, then if you do find the correct tm, it is written for the military shop with all the nice goodies and sometimes soldier a and...

i dont think he even posted a link, a aution #, or anything. all he was asking was "is this truck rare" because he had never seen on gl before and him being a new be makes sence

"bell housing shield pan thingy " this is one of the reasons i LOVE this site so much, im constently learning the names of the verious MV parts. ps., i did a search for THINGY, you would be surprised how many thingys are on MVs

check to see if the speedo cable is broke, its easy to chang, eather a make your own kit from auto zone or a cable from the dealer

Mike, well done

this site is all about everybody, both the new as well as the old . i still have a he/ll of a time with some searches. even if someone found what they wanted in the search, it still help if someone chimes in with some first hand knowledge. everybody here has learned from somebody else, that is...

for a NON mudder , what about rice & canes that makes then so great

almost all otr trucks have them, all the trucks that my co. have ,has then, there never seem to be a problem

RE: Re: RE: fuel return fittings if you use the dot hose and the hardware store ferrules, be sure TO USE the metal inserts , the ferrule will hold for a while then leak without the inserts, also with the dot hose you can tighten to tight and cut the hose. it is best to use a dot fitting, these...

will that pump fit a 809 series tank, is the bolt pattern the same for the pump mounting plate as the draw plate on the 809 series, can the pump be extended to the bottom of a 809 series tank???????????

pm me your mail addy, the pic is a hard copy, so snail mail is the transport mod

kurt lesser, pres. of the mvcc, had a hwmmv prototype at the 99 mvpa convention, as i remember it. going though my pics, i found a pic. its the same as the above pic. not much but you can have it , pm me your addy and ill maill it to you. if you want ill pm you kutas phone #

:ditto: the 819 got caught with its battery water down in one battery :oops: , both are on float chargers

$108 a year for the 819 with haggerty

RE: Re: RE: 3 batteries? i have two 8Ds in the 819

dave, i pulled the rear driveline between the rear axles, it was like that when i did the trail ride at the last ga rally. i climed the mountain in high first (bad xcase,no low) and front wheel drive, i figure the the 819 is so HEAVY that if two axles wont get it out, it is to late anyway, i...

RE: Re: M818 on a regular height 60" flatbed legally??? i would do the drop down to a step deck with a 818 because of the short wheel base, would NOT do it with a 816 , if you are worried about high centering, take two 4 or 5 foot 12x12z with you , let the front wheels come down on these first...

that fan looks like your pretty much standard 24v equipment fan, almost any fan of that type will work , paint it od and your good to go