Search results

Would anyone have the part number for the orange turbo inlet coupling hose in the picuture below. It is 3" long and 2" ID. It seems to be missing in the part TMs. Only ref I could find is for the LDS, none for the LDT. The Memphis parts guy was having trouble finding it also. Thanks Dean

Is the free play in my accessory switch as shown in the short video below normal? Thanks Dean

Reaching out for a bit of advice... I am in the process of replacing my winch cable. Contacted Esmet and was pointed to my local distributor. Ordered a replacement plug (had to buy six to make the minimum) and I recived a very different style (as seen in the picture). I called Esmat and they...

Since this is my first winter with the Deuce, how cold does it need to be before I need to use ether or a heater to start the engine? If I understood what I read on a post, you can damage a diesel trying to start it in cold weather without a block heater. Is that true? Thanks Dean

Going thru my winch I found that a couple of the top channel threaded holes are suffering from corrosion and need to be repaired. I see some references to using heli coils for this in the archive. So, a question related to the basic repair: How long of a heli coil should I use? The hole...

Would anyone have a picture of the top channel on the 10,000# winch showing the data plates? Thanks Dean

Searched around a bit after seeing a post about ID'ing whether you have CARC or not paint on a truck. Did not see the relavent post. The reference stated was something abreviated like nail polish remover and a rag.... Is there a quick/easy way to determine if the truck is painted with CARC...

Would anyone have and be willing to share a drawing of the proper dimensions and the locations and size of the holes. Mine are pretty bent up and I dont know if after I bend them back into shape is they may have stretched a bit. I am thinking about having a set folded up at a local shop and...

Being the proud new owner of a winch for my Deuce I set about to go thru it before mounting on the truck. Need advice... Should the end frame (#12 in TM 9-2320-361-34) just slide off once the channels and rod nut are removed? The TM leads me to believe this but mine is not cooperating. It is...

Anyone know where I might find part #11602160. Erick's is out of stock. Found on on Ebay but the picture does not match the part#. One list in Israel but I don't think I want to wait that long! Saturn lists something but not sure. I'll have to call them. Pretty much other than that Google drew a...

Spending quite a bit of time looking for a winch setup to convert my non winch but have not really had any success. Posted on a couple in the classified but those don't seem to be an option for one reason or another. Can anyone point me in a direction to look for a kit? Thanks Dean

Starting to go thru my new truck checking fluids and learning its sounds. I expected to see purple brake fluid but I found yellow (see picture of a sample I pulled from the MC)! I am assuming that DOT5 only comes in purple, correct? The fluid is nice and clear, just yellow! If so, assuming...

New member here. What a great site this is. Got my eye on one of Pete's trucks and I am trying to learn everythng I can about titling, plates and insurance. I stayed up waaayyy to late last night reading everything i could find on the subject(s). The ins and outs of the legal stuff makes my...