Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I parked my truck back in late fall ran fine, it was kind of low on fuel and had summer fuel no anti gell Well couple of days ago I went to start it started right up ran about 3-5 minutes and shut off. I don't know if it gelled or ran out of fuel It has been real cold past couple weeks I went...
Sorry fogot to put ,I have an m35a3 I have a problem with the low air buzzer going off when turning the wheel. (before somebody jumps in and says use the search I did ) I went and put marvels mystery oil in the air intake on the steering box and also in the air assist cylinder behind the axle I...
Please don't say use the search I did and did not find anything I need to replace the front drivers side wheel bearing on my a3 . I was out for a ride today and heard a squeaking sound with turned into a grinding sound and then started to smoke out of the front wheel I did get to baby it home ...
I have a m35a3 and need two new batteries What is the best group size to use other than the 6tmls Thanks Kevin I have no problem making a adapter for the battery box Thanks Kevin
I have a m35a3 and it wont turn over all it does is make a clicking sould at the firewall. I checcked the voltage and it is reading 23 volts at the starter . so I guess that rules out batteries. I did check the voltage at the solanoid on the firewall and it reads 23 volts on the one side and...
I have a m35a3 and am in the process of fixing a leaky tire. does the o'ring go in the beveled groove between the two halves Just checking as I do not want to have to tear it apart again Thanks
I have a leaking tire on my m35a3 that is leaking between the split rim . I took it all apart tonight and plan on reassembling it tomorrow. I got a new o ring this time should I do anything special or do I need any silicone between the two pieces This is the second time I had to take it apart...
I am wanting to ad an air quick coupler to the air line so I can inflate tires or if need be run air tools off truck ( I do have a air compressor I just want to be able to use in field or in a bind) Where is the best place to tap in Also any suggestions on best place to mount the quick coupler...
I just noticed ,when I was pulling my tranny on my m35a3, that it has a oil leak on the passenger side somewhere around the turbo. I can't really see where it is coming from or how long it was leaking (i park it on a gravel driveway and never really saw any oil ) When I was working on tranny it...
Well I am getting my allison auto rebuilt and wanted to know the best way to flush the tranny cooler and radator out . I am going to go with dextron 3 instead of the motor oil . Also is there something beter than dextron 3 or is that going to be ok Thanks Kevin
I am just about ready to drop the tranny . I have everything disconnected but the torque converter and the bell housing bolts. Will that come right out or do I have to remove the u joint coupler? It looks real tight but I am hoping it will just drop straight down with a little twisting Just...
This may be a stupid questions. But, I found a new Allison at1545p and just wanted to make sure they are all the same. It came from a ford dealer and is supposedly brand new and dry, never had fluid in it. I just was wanting to know if the military version is the same. I did call Allison tech...
Anybody know where I can come across a at1545p tranny. I have been searching for hours online and no real good leads or finds. Is it possible to put the at545? I can't really find any info on trading them out. I am going to call allison on monday. Thanks in advance
Just looking into my options is there a rebuild kit sold for the at1545p I have a few friends that could probably do the work if I could get a kit reasonably Thanks kevin
Can somebody tell me the difference between the at1545p and the at1545 and the at545. I have been searching and haven't found anything. I want to change out my tranny in my m35a3 it currently has the at1545p Thanks Kevin
I have a m35a3 and at it wont go forward I went to take it for a ride today and it didn't want to shift out of first or second so I put it in nuetral and back in drive and it was ok about a minute or two I went to back up and it did I then went to go forward and nothing I had to drive it home...
I have a m35a3 and need new drivers side door window and frame ( frame rotted away and glass broke ) also need two new windshields can anybody point me in the right direction I did seach on line But was looking for a better deal Thanks Kevin
Ok I am finaly getting the bugs worked out Today I opened the window and it would not go back up so I pulled and turned at the same time and the glass cracked Anybody tell me a good spot to get one I saw a new one online for about $135 I was hoping to find one cheaper While I am at it I would...
Is there an easy way to check the brakes Do you have to pull the tires Is there an inspection port I took it to get inspected today and they went over the whole truck very good and checked everything but brakes Thanks Kevin
I just got my classic plate and was wanting to know the best place to mount it I live in Pa,do I have to mount it? or can I just put it in the glove box like some others do? If I do have to mount it where is the best place and do I need a light? (I know you are supose to have a plate light but I...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!