Search results

So the led upgrade issue I am having is really getting me mad.... so installed lights and they work great . My problem is fitment issue.... I have grote lights for both front and back... the issue is they will not fit my plastic light buckets. Is there a different one that will work that I need...

So I have a 931a2. Over the last week I have noticed that my motor has sprung a bad oil leak. The leak is in the front of the motor. At first I thought it looked like but was leaking front of oil pan. So made sure all bolts on pan where torqued to 18 ft/lbs. None where under that am out. Next...

So I got a set of 53's and had them mounted. Now ctis is in Fritz. When I manually air all tires to about 30 lbs. Start truck hit highway mode, the system either 5 light blink or starts dumping air.... it will dump air from the back part of driver side middle axle ctis tire valve... I am...

So I'll start with easy one. I am upgrading to some jw speaker head lights. My truck -lite less. Died on me. Question is on the h4 plug. Anyone know what number on truck is high and which is low beam? Second part.is my blinkers... they made a slow death now won't blink at all... I have installed...

So last week I was lucky enough for my fuel shut off solenoid to go out. Well new part cam in and kinda running. My new issue today is the air pressure... for some reason it is building crazy pressure close to 150 psi so shut it down and drained tanks. Anyone have idea what decided to go out now...

Well plain and simple my emergency shut off fried... What i did was start truck to let warm up like i always do. Went inside to do some things . Came back out and truck was not running anymore so a little puzzled. I climbed into cab to see what was up, could smell burned wire.. My mind started...

Well I finally had good weather and time home to put on my hardtop. Took about 4 hours from start to finish. That was with removing to old soft top and mounting and bolting most of new hardtop down by myself. The issues I am now having is trying to get the dents out of the top. I have tried...

So I have learned when my truck get hot or work it a little heard the fuel quits on me... I have an electric pump that pushes awsome pressure to the system... when to hot it seems like the shut of gets stuck. Have reset and still won't start. Was wondering if way to bypass or if there is a shut...

So first I am very new to this truck and the big green addiction also... Have gone thru a lot of the TM's on the subject.... I suffer from 5 blinking lights. Things I have done replaced the ecu the PCu and searched for leaks. I also have bumped the pressure up to 135 lbs.i hear it try to cycle...

Was looking for some info if anyone has made or done a setup for a gooseneck trailer. I am sure I have a bit of fab work ahead of me . Just wanted to get some ideas or see what others may have done.

Ok first I will say sorry cause I am a bone head this week... So I have a 931a2 one of my tires is low... Ok it's flat . I was wondering for direction on how to manually fill tire. It's too low for cutis to feed it. Any how would be very greatfull!

I need to get my 931 home. The truck runs so easy to load with ramps. Not at gov site so can even be picked up on weekend... also willing to work out if cannot be brought all the way to nm.

New owner of a 1991 m931 a2. It is located in ohio. So after thanksgiving was gonna fly out and drive 1500 miles home to albuquerque. I will not lie I am freaking excited for this toy. Since driving back from Ohio was wondering any advice on what to watch out for. Like if I have to go into...