Search results

that is SOOO unsafe, and to think if you cut that and dropped the shackles it would be perfectly safe.

ok, I'll bite. What did he have you do?

Every cucv that i have seen has already had a drain plug welded to the bottom of the pan. :D

yup, iirc they should be blue plastic. Any auto parts store should stock them and you should be able to buy just the female ends in a box.

I put it in the right place for you, and welcome to the site. :)

Please look under the "FAQ" menu on the top of the page. [thumbzup]

If all you need is the socket, I remember a few vendors sell replacements. I can look them up for you, let me know.

i have mine wired to the trailer T-connector i have on the truck, just running off the same wire as the running lights. For the actual light, I got two of those "ricer" windshield wiper arm lights, with white LED's. I painted them black and use the bolts to hold the lights and plate to the...

Re: RE: towing a M1009 with a 98 chevy c1500 NEVER NEVER NEVER PUT AN AUTOMATIC TRANSMISSION IN NEUTRAL TO TOW IT WITH THE ENGINE OFF, YOU WILL KILL THE TRANS!!!

I highly recommend the NWF crossover steering setup, Its what i have on my truck. One thing replace the nylon bushings and springs while you have the kingpins apart, its a cheap thing and you wont have to do it again for a LONG time. I'm not sure your gonna like it if you weld the diff on the...

i'd get a bottle of trans flush and do a flush and filter change on the trans, it will fix a sticky body and let you know if its slipping clutches. Keep an eye out for clutch material in the bottom of the transmission pan when you take it out and watch the fluid for stuff as you drain it.

RE: Removing the IR and blackout light and 24volt jump syste AJM is prolly referring to the blackout lights. those switches handle the power to all of the lighting. you can remove the switch and jump the connector to supply power to the service lights all the time. I would keep the original...

Add it.

RE: Unit level CUCV maintenance manual? AJM, That manual is already linked {thumbzup] Its called the "direct support" manual I will add the numerical designations to the descriptions of the links, I didnt when i created them because most people wont know the numbers when they need to download...

it should be a fairl firm connection, no wiggling once they are on. you can tighen them up with a pair of needle-nose plyers. Just put them on a spare spade connector and crimp the rolled sides lightly, might take a few times (you dont want to press too hard. Or go spend a few dollars and buy...

sweet, more pics [thumbsup]

RE: winch pics lol, good one Kip. Gimp, where are those pics of the m715 ?????

I would drop the tank for sure, sounds like the sending unit isnt sealing on the top of the tank. its quite easy, esp. since you have the tank empty already. Undo the bolts holdin on the skidplate, then you undo the two nuts on the inside of the frame that the tank straps are connected to...

sweet, keep us updated. try to write down the little things that get in the way, or cause delays/issues/parts store runs.

What!! You got the truck for $200, you lucky dog. ;)