Search results

As some of you guys may know, my deuce got into a fight with a guard rail this last decent snow we had in DE and the guard rail won, kinda. I finally got around to adjusting the t-case shifter because the cab had tweaked and it seems that now Thunder is rollin better than ever, takes off like...

So I finally got the deuce back together, frame and leaf springs are firmly attached to each other again, steering box is now in (though I needs a bit of adjustment, maybe one flat on the screw). Took it for a test drive yesterday and found something a bit disturbing. I think my drivetrain, or...

well, as some of you may know, last week i had a bit of an accident in the deuce involving ice/snow covered pavement, and a guard rail. was comming around a turn at 25-30 mph, and the back end swung right, i counter steered too much and it came left and the drivers tire impacted the guard rail...

Well it's time to replace my deuces steering box, hit another patch of ice the other day, counter steered and hit a guardrail with the driver tire and sheared the output shaft from the steering box off about an inch from the frame. Only damage was the guardrail and steering box, the tire (only...

When I picked up my deuce last month it had a small leak at the passenger side glad-hand shutoff, nothing big, just enough that it would bleed down over night. Well the other day I was clearing snow off and I nudged the actual glad-hand cover and it started hissing, so I nudge it back, no...

So yesterday I was screwing around in the snow at school and backed into an 8 foot snow bank at about 6-8mph. After lunch I decided I could get in further, so I grabbed third gear low and wound it out in 6x6 headed for the pile, blasted in and decided I could go even deeper. So I back out, put...

So me and my stepfather are about to start making some home brew bio for his masey ferguson tractor and my deuce, he's got the setup and wants me to do the leg work and he'll 50/50 what he makes with me. I know in the summer 100% bio will be fine, but what about winter? Night temps around here...

With the ULSD they have comming out of the pumps nowadays I was thinking of throwing in some marine 2 stroke to help the deuces injection pump a bit. Was wondering if there was any harm in this, I'd use normal 2 stroke, but it only comes in tiny bottles, marine comes in gallon jugs. I also hear...

So this morning Murphy decides to drop by my house...... Was running about 45 minutes late, so I run out to the deuce, flip the power, waited about 3 minutes and tried to fire her up, flame heater and all, no dice. So I wait a few seconds and chalk it up to nipply weather, tried a second time...

Not sure if this goes here or salvage yard. But apparently Falcon Steel in Wilmington is scrapping 3 deuces. I was dropping off an application and talking with some of my uncles buddys, they said if I come by tomorrow they'll see if they can get me a shot at taking all the parts I need. I'm not...

Well yesterday on my way back from exton, I'm about 5 miles from home, and I start noticing that when shifting to first after hitting the clutch and waiting my usual 4 seconds for the gear to spin down, that it seems the gear was still spinning. "okay" I think "maybe I just tried to go to gear...

Been wondering for a while if anyone on here owns the deuce on Weeb road off of PA202 and near PA1. it looks to be either a standard or A1 deuce as there is no stack, and it has a plow and hardtop with the overhanging running lights. Haven't drove by there in my deuce yet, as I don't rememberthe...

Well, as of 10am today, I will have the rest of my deuce money (and on a side note, repair money for my bronco the insurance company is trying to total). Leaving tomorrow night for jersey and I'll be bringing the hold girl home Sunday afternoon, hopefully lots of pictures to follow as I'll have...

So as it come closer to recovery day, I'm trying to do one of two things about my HOA issue where I reside, either 1) hide the deuce in the neighborhood somewhere (okay right, like that will ever happen....) or 2) find a nearby, as in walking distance, business that may allow me to make...

Will a centrifuge remove coolant from waste oil? Inlay have access to a rather limitless supply of WMO from my former employer. The issue is, I know what got dumped into those tanks, had a few batches I dumped in from drop offs that were loaded with water, which I know can be separated with the...

So Im using the deuce as my topic for a research paper in my manual drivetrains class and one of the points is what type of flywheel is on the vehicle, ive used the search and come up with nothing, so the question is: Does the deuce use a dualmass flywheel? Or is it a singlemass? Thanks in...

When I pick up my deuce here in the next 2 weeks, I want to quickly get to work on repainting the soft top cab cover, although it currently has a camo top, it's a tad leaky so George offered at no extra charge to put a brand new top on it.... But it's tan, I deffinatly want it because it's free...

So delaware has thrown me for a loop, they say they NEED a current value quote for the deuce so they can see how much theyre going to charge me in order to register it. I already have been quoted for 364/year if I tag it with the 23k GVW, but apparently i can change it according to the max load...

Was down at reedy point fishing under the bridge today and saw a Unimog w/ trailer comming out onto the road leading to the main road, anyones on here?

Well I went up to jersey yesterday to look at some deuces that George (gem1410) had for sale and I found the perfect one for me. He asked 4600 for it so I gave him 2000 to hold it for me till December when I'll have the rest of the money available to purchase it from him (pics and a short...