Search results

I came across a injection pump that has a electric cut off switch instead of the normal pull cable and a new hh number I have never seen before anyone have any insight on it the numbers on the hh were HD 90111A and no I did not type that wrong it is 90111A

I just got a nos 427lds 4-454 turbo so I know a few of you guys have these turbos on your trucks I need to know what it takes

I am rebuilding my brakes. I have heard about all the issues with the brake light switch going out and leaking. I was thinking about the air switch upgrade but didn't like the idea that it might leak to and lose air pressure. So I was thinking about a mechanical switch for the truck. I found a...

Ok so my th400 took a dump on me an I snaged a 465/205 from a 90 model one ton with a diesel. My question is since I am useing a hydro clutch is all the mounting points in my 86 m1009 already marked for my hydro setup or do I need to make a templet from the other truck and place them myself I...

i guess the title says it all. i was wondering if anyony had seen this done i was wanting to put like a 44x20 and would like to see some pics or run a skinny 42.5x13.50x20 just wondering if they would handle the weight of my bobbed duce?

i just got a m35a2 for parts for my bobber it has a winch on it. when i was removing the winch kit to place it on my bobber i noticed that it had a chunk missing from the clutch side of the case on the bottom side and was leaking gear oil. i was wondering if this was fixable by replacing that...

ok here is my problem i need 12v from my 09 for off road lights and a headlight relay upgrade and a stereo with some high power amps. i might need to pull other stuff off of this later to but, i am really not shure of all the amps or load i am pulling if the 12v lug on the fire wall will handle...

ok so i almost have my one ton swap on my 09 done. i got a mc from a 86 k30 for the bigger brakes but the factory brake lines wont fit the k30 mc. does anyone know the size of the 09's lines and fittings and the size of the lines and fittings for the 08's i thought they would be the same. maby...

Is anyone looking to sell a winch kit or maby go in halfs on a parts truck. I live just south of dallas and figured it might be cheaper for me and someone to just buy a parts truck and half it and either sell or scrap the rest of what we dont need. I was just wondering if maby somdone in my area...

I have a 1967 kiaser m35a2. I took the old man out for a ride tonight and everything was good, untill I stopped and killed the truck to use the phone. When i went to restart it all it would do is spin over and not even a spit cough or sputter to try and start. I have a frame mounted fuel pump it...

i just bought my '67 m35a2 and have no blinkers. i have replaced the turn switch and the headlight switch both were broke. i also ordered a flsasher never know i figured. i still dont have blinkers after replacing all three pices i am about to go nuts trying to figure this out. i have noticed...

I just bought a deuce and on the way home to Dallas I had a flat in Shreveport L.A. I was wondering if and one had a spare 14.00x20 Michelin or could help me put the ndt's back on I have them in the trailer I don't have anything to Chang's a tire on the deuce with me. Help please my cell is 214...

i am trying to buy a duce with no title just a bill of sale. the guy told me all he has is a bill of sale and that another guy has the title but it is not in the guys name that has the title. from what i get there was a death in the family and the truck was sold to him and one of the family...

ok so i have lifted my m1009 with a 6in lift and 35x14.50 boggers and just broke my third rear axle so now im doing a 14ff and a d60. i have a set of 37x12.50 wrangler mt/r's for daily driving and want to get another set of boggers for the one tons. i have a 8in lift i was thinking of putting on...

ok so the other day one of my hub bearings went out and trashed the hub and axel and i lost brakes so in the process of trying to fix it i found a dana 60 and a 14 bolt ff with 3.73 gears the 14 bolt is out of a 89 burb it has a locker and the dana is from a 70's dually so i spent all day today...

ok i have had my oh9 for about a year with no probs untill now it wont start i have never had this prob b4 i got in it one night and the starter wound not spin over the purple wire on the starter that makes the silinoid kick is dead i have power in and out at the top of the colum and to the 12...

ok so i love my new cucv but hate the gears. the stock 3.08's have to go thinking of some 3.90's for more pulling power it will get a lift and 35's later for play but anyone have any ideas on what gear ratio i should run. i will run the stock 31's in town after the lift and the 35's for play i...

ok so i am going to fort hood in the morning to recover a m105a2 trailer with my m1009 in the morning i just got my first euc back it only took 59 days not to bad needing to know what i should take with me to recover the trailer

i want to get a lift for the m1009. i would like a 6in with 35's any ideas about what needs to b changed steering dive shafts i was hopeing that i could do a 6in and not have to make the drive shafts longer any ideas?

ok im new here and got a nice m1009 from fort sill waiting on my euc first one for me it was sent to bc 9-16-10 i was wondering if anyone has got a euc back for that auction or not and i need a check list of what to take with me to get the truck home i live in dallas it says the truck runs i...