• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. bjsmith

    Need help converting 3 phase to 1 phase

    I have all the main wires configured the way they need to be. But I just need to know if I need to switch any of the small wires. I have schematics posted just not sure if I need to move any of them. The pics or from the installation manual that would have came with it in 61. Thanks for any help
  2. bjsmith

    Generator id?

    Could someone tell me the model of this generator. It's a 56.2kva with a 4 cylinder cummins. Was told it was old military generator but does not have any of the original placards. All it has is the generator and engine data plates. Thanks
  3. bjsmith

    M923a2 battery relocate and 12v alternator add on

    Decided to relocate my battery's from under seat to toolbox on side and add 2 batteries and 12v alternator to run all my 12v stuff. The alternator is 160 amp Leece Neville on homemade bracket that sandwiches between original alternator bracket and engine.
  4. bjsmith

    My new 5 ton

    Here is pic of my 93 M923a2 that I traded my lifted 86 M1009 for.
  5. bjsmith

    might be getting 5 ton

    I might be trading my M1009 for a M923a2. What are few thing I should look far? I had a deuce and know the common things to look far on them but never had a 5 ton.
  6. bjsmith

    My 09 Mods

    When I got it had 6" lift and 35/14.5 boggers on 10 bolts with 3.73s. Now it has about 7" lift redid the front with longer shackles and did rear shackle flip to remove blocks it had and made my own 2.5" block that also moves axle back to recenter in wheel well. Has Dana 44 front with limited...
  7. bjsmith

    yokes?

    Anyone have or know where I can get the flanges that bolt to the yoke of np200 transfer case. I just picked up this transfer case for a project im doing but need the flanges.
  8. bjsmith

    new to me m1009

    Dont know if i made the right choice or not but traded my bobbed deuce for this 09 from member on here. Looked better in pics and was details i was given about it but anyway i have it now. It has 6" front lift and 4" rear but that will be fixed soon. Sitting on 35x14.5 boggers that also will be...
  9. bjsmith

    HELP!!! need rear axle shaft asap baton rouge la

    I need to borrow 1 rear axle shaft. I went to help a friend that was stuck and got myself stuck and broke a axle trying to get out. Well now I got it out but im in soft sand and I can't drive it with just front tires pulling just wants to dig. I will buy,rent,borrow what ever I need to get my...
  10. bjsmith

    deuce bed as trailer

    well i bobbed my duece now i decided to turn the old bed into a trailer. it will probly never see a heavy load so i just picked up at set of m105 springs and mouted them to the 6" channel that the bed is made on then cut out the floor for the tires to clear and will make fender wells soon. i am...
  11. bjsmith

    where to buy sprag

    i have searched and could not fing where to buy a new sprag i have searched here and on google i need a new sprag for my duece the forward part is messed up reverse still works fine so would like to be pointed where to find new sprag or cheap air shift transfer case thanks
  12. bjsmith

    going to bob my deuce

    bobbing the deuce and paint was asked to start new thread by a couple people on here so here it is i picked it up from member on here couple days ago here its is when i got it
  13. bjsmith

    new deuce im getting

    i had one until few months ago and got rid of it wish i hadnt now im getting another thats in better shape than my old one so guess it works out. the guy said trailer was just rebuilt with new bed,tarp,sides, and bows not long before went to aution. i think i will bob this one i had plans to do...
  14. bjsmith

    took deuce offroad for first time in river

    usually ride 4 wheeler down there but decided to try it out. dont have many pics but here are the few i have. only got stuck once luckly 3 jeeps with winches came around the corner soon as i steped out the truck
  15. bjsmith

    m105a2 vin ?

    i tried serching but couldnt find what i need i'm trying to find out where the vin is stamped on frame or if it is my dta plate is damaged and cant read all the numbers
  16. bjsmith

    switch to soft top

    anyone know where i can get a good soft top complete with everything needed as i have a hard top now
  17. bjsmith

    won a m105a2

    euc cleared going pick up tuesday cant wait
  18. bjsmith

    vin problem

    got sf97 from the guy i bought from then went to find vin on frame to go get the vin verification needed to title it here. then found my vin and sf97 dont match 1 number different mine is 032517724 and sf97 says its a 72 am general but data plate and frame say 012517724 made by kaiser accornding...
  19. bjsmith

    insurance in louisiana??

    just got all my paperwork and about to go to omv but having hard time finding somone who will insure my deuce any help pointing me towards someone who will without driving restrictions or having to be garage kept would be apreciated
  20. bjsmith

    getting a deuce tomorrow

    i'm going pick up a deuce tomorrow i have a couple to choose from. one of them has the box on the back of it is it just mounted to top of normal bed or is it one unit? ifit is seperate is it hard to remove? i dont want to box one but if its it better shape i will get it because they are all the...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks