• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. Manstein

    M923 Hard to start on any slight incline

    If I leave it on flat ground over night it lights with just a bump of the starter, but if it's just slightly nose up, it takes forever to reprime. Can't see any visible leaks in the fuel lines. Anybody else run into something similar?
  2. Manstein

    M923 Speedo inop

    Is the speedo driven from the trans or transfer case?
  3. Manstein

    M923 Trans fluid quanity

    Howdy all, Searched several threads on the exact fluid capacity of the allison trans and got some great info, but no one ever listed the actual capacity or the amount they used to fill it back up after a drain. Any ideas?
  4. Manstein

    Mep-016e

    I have a MEP-016E that turns over and won't start. The electric fuel pump and the solenoid that controls the throttle will only work very intermittently. Since the machine was converter to the yanmar engine, it doesn't appear to have worked because the oil in it is golden clear like it was...
  5. Manstein

    Mep-016b

    Howdy boys, I just acquired a MEP-016b with a brand new dead battery so I'm in "no start" mode. Until I can secure a new battery, can I crank it with the pull start? Making a few attemps it seems that not having the electric fuel pumps running will be a problem. Any suggestions/ideas appreciated.
  6. Manstein

    antenna mount and bracket

    I need the box looking antenna mount spacer and the scoop looking mount. If you have one or you know where to find one please tell me. I check with Saturn and Memphis... nothing.(drats and double drats)
  7. Manstein

    Antenna and mount

    I'm looking for a whip antenna and mount. I've seen a couple mounted on the front right side of the bed. Anybody got a source?
  8. Manstein

    Loose door glass

    My door glass windows are loose in the channels. Glass and frames are fine they just rattle when down and pull out at the top when rolled up. Ironhorsethegeneral was telling me there is a kit to fix that. Anybody know what I need and where to find it?
  9. Manstein

    pyro temp reading too high

    I recently turbo'ed my truck. I rolled the timing back during the swap and installed a pyrometer. Since being able to monitor the EGT if I get under a load or floor it the temp reading on the pyrometer will go up past 1200. I have to throttle way back to keep it below 1150 when climbing a hill...
  10. Manstein

    Low level radiation

    Anybody ever seen this phrase in a govliquidation description? I wonder if some new guy just defaulted on the description page. If not, I wonder what they got exposed too? Maybe you don't need headlights to drive at night. http://cgi.govliquidation.com/auction/view?id=1437169&convertTo=USD
  11. Manstein

    turbo install problem

    I've got the turbo hung and I'm trying to remove the oil gallery plug in the side of the engine block for the oil supply line. The thing won't budge and I've rounded of the square fitting. I'm planning on heating it up tomorrow and then trying to remove it with a pipe wrench. If that fails, I...
  12. Manstein

    Removing oil gallery plug

    I'm in the middle of a turbo install and I'm trying to remove the oil gallery plug. It won't budge and I have rounded the edges trying to remove it. Any suggestions?? Tomorrow I'm going to try to heat the plug and then try to move it with a pipe wrench. If that won't work I guess I'll have to...
  13. Manstein

    looking for Whistler Turbo

    Anybody got a turbo for sale? Looking for a whistler to upgrade mine.
  14. Manstein

    New Paint

    Well, after much debate I rattle canned the Deuce. And what better to do right after that? That's right, straight to a car show. We had a weekend airshow/car show in Rome Ga. It was a lot of fun and everybody has a story about their "Deuce" experience. It really is a piece of living history. I...
  15. Manstein

    No brake lights

    Well boys, I had brake lights then, after picking up a M105 and checking its lights I noticed I don't have brake lights or rear turnsignals on the deuce.!? The front lights work with signals, the green light on the signal switch flashes but I got nothing on the rear. I checked the bulbs and took...
  16. Manstein

    trailer bows

    Anybody got a set of M105 bows for sale or know where to find them?
  17. Manstein

    lunette size

    I've been converting a car hauler to be able to towed by the deuce. I bought a lunette hitch from Northern Tools but it is just slightly smaller than the pintle on the deuce. Anybody know where I can obtain the correct size for it?
  18. Manstein

    Anybody ever convert M36 to troop seats?

    Anybody have any experience with putting troop seats in a M36 or know what it will take? I haven't measured anything yet so I don't know if you could use seats from a M35 or not.
  19. Manstein

    24 volt trailer lights

    I am fitting my car hauler trailer with a pintle hitch so I can tow my jeep with the deuce. I heard somewhere that you could use LED lights and they would operate with both 12 and 24 volts. Can anybody confirm or deny? This would allow me to use it with my pick up and the deuce if possible.
  20. Manstein

    Transporting M105A2

    When you boys have gone to pick up your trailer, do you tow it with the deuce or with a regular pick up?
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks