Search results

Welcome from central Michigan!

Well for starters its a 24 volt you need a 12 volt!

Remember to keep the pics up here when ur done!

Not that you do not know ( you would be surprised how many don't ) make sure if you get a replacement make sure the gears are the same as what came out stock should be 4:56 unless somebody changed it at some point just be sure to check! will not be good if has been changed at some point. Just to...

As stated fel-pro os34400 or victor os30591

I prefer felpro myself but both work. stay away from the cheaper gaskets imo.

As gungears stated you local hardware grade 8 best grade 5 good not a specail bolt if not there lowes,home depot, menards and you local parts store!

Good luck! let us know

Nice truck!! Only thing that would be better then a m1008 is a nice m1028

They are a diff animal ! but work great !

welcome to SS and nice lookin truck!

I would check the bearings! are you shur the noise is from the rear axle?

Welcome to the forum! looks like somebody did a lot of work on that truck ! once you get warm weather the fun can start! good luck on getting it going again!![thumbzup]

Got to be the best looking truck have seen in a while!!! :beer: Great job can't wait to see it done!

Nice lookin truck ! Good job! [thumbzup]

If it works! then that is what matters! :driver: You may be surprised had a roundy round car I ran for years 1/4 mile track two into one like your set up, sounded and even performed better then the duals! :jumpin:

the body shop down the road from me that I work at doing his mechanical work gets all his body parts from LKQ may check them out ( lkqcorp.com ) [thumbzup]

All the talk about snorkels and vent tubes and nobody ever talks about the dip stick tubes. Water gets in the engine or trans and no snorkel or vent tube will help you! got to step back and look at big picture. The alts on these do not like water , then there is the power steering pump. just a...

Nice MV! or m1009 whatever you call it! NICE FIND![thumbzup]

Also a worn sping bushing can also give the same problem or symptom take the same tape measure use the front spring mount bolt and check distance to the center of the axle on both side to check your center bolts no need to take anything apart unless you find a diff. can check on both axles save...