Search results

Nice..

I had to replace my rear main seal also. FUN.. I like that they put 24 bolts in the block to hold the oil pan on.:?

Mine goes down all the way. Does your tailgate open and close? There is a linkage in the botton of the gate that makes it so you have to put the window all the way down before you can open the gate. I took mine out.

Your going to have pics when??? :grd:

Sorry, was not in a good mood yesterday and it's not your fault. Again sorry for making a fuss...

I clearly stated the seal was shot...:roll: But, a oil cooler line makes more sense.

This might help, and it might not... Last year my 09 didnt leak a drop. I stored it during winter and recently got it back out. I changed the oil, and a few days later it started to leak out the back of the oil pan. So, I pulled the oil pan off, took the oil pump off and the rear main cap for...

EDIT: Found a puddle on the passenger floor... Heater core huh? so now what... New heater core or can I salvage it? Buy a new one... $35.00 at Autozone...

Now I'm thinkin three studs around the heater box on the firewall, and one bolt from the inside. Then you can get to the heater core after you undo the clamps off the radiator hoses.

There is three or four studs sticking out of the firewall. If you dont have time to fix it right loop the heater hose and eliminate the heater core for now. Or like stated above it might just be a hose.

If you can re-connect them you should.

Hmmmm.... Welcome Craig.

Hey guy, First off I'm not a moderator and I have no authority here on this site.. But you will get more info in the CUCV part of this site. Second as stated above the axle is not military issue, it is the same as a K5 blazer. Just my 2cents. Good luck with that.[thumbzup]

They probly are getting replaced by the HMMWVs. Think of it this way, if you go to war what would you rather have a blazer with sheetmetal floors and thin glass or a HMMWV with reinforced floors for land mines and bullit proof glass to keep you from getting shot. I have not served in the...

I've installed a crome handle on my 09. I to painted it flat black before installing it. If your window goes up and down smoothly with no tight spots there is no problem with the manual handle. I had a broken handle when I bought mine, I took the whole thing apart oiled and greased what was...

I was looking into a exhaust for mine also. Check out this thread, it might help. http://www.steelsoldiers.com/cucv/66208-worth-air-cleaner-exhaust-mod.html

Congrats on the new truck. Maybe look at the vacume line for the trans. Look for a cracked line. It might solve some problems. Your blinkers, I'm not sure. Oh, and, nopics Good luck with it.

Nice, another rebuild. The CUCVII was awesome. I'll be watchin, I love that dually... Good luck.

I'll trade my first born for 1. See pic.