Search results

Hello i need to get alternator belt for passenger side alternator on m1009. im going to get at autozone only store close. can anyone tell me what size belt and or part number for belt on passenger side alt. that will work on my m1009? any help would be greatly appreciacted. Thank You:?:

Do i need to mount the napa st85 glow plug relay a certain way so that the wiring to it is correct and not flip flopped on my m1009? Or doesnt it matter which way? Thanks

Hello I went to fuel up last night and after fueling up when i went to start my m1009 the starter made a whining noise and wouldnt start. I have a delco remy 28mt 24v starter. I have had the starter on my m1009 over a year now and have never had any issues with the starter. I bought the starter...

Hello I just bought a 600 watt Katz block heater for my m1009. Does anyone know which freeze plug i should knock out and install the Heater at? My other question is for anyone with tips on knocking the freeze plug out the easiest way with out damaging the hole? Any one else on here living up...

TM manualtm9-2320-289-34p page 20-1 saysto make your own line from steel tubing and only gives lengths of 78,69 for the fuel feed and 73,44 length for fuel return. Does anyone know what size diameter line in need to get for both of those? Thank You Dave

Hello I forgot to take pics of old one before removing it. Can anyone let me know if i mounted the new one incorrectly? or correctly? I have attached pic of how i installed . want to make sure its not backwards or upside down before starting. Thanks

I wanted to purchase a solargizer for my m1009. I was hoping to get some feedback and which brands are good and which are junk? Ive looked on ebay and prices fluctuate and also there are a smaller 24v solargizer and there are a bigger one that is size of 4 of the normal sized solargizers. Anyone...

Hello i hook up gear reduction starter its been months since the old one came off anyways every thing is bolted down . i go to bolt down gear reduction starter bracket and notice there is a gap behind bracket and engine block. I go to the TM and see there is a small heat shield that is suppose...

Have couple questions. I done the doghead starter relay mod about 3 weeks ago and at that time i had my old direct drive starter in it. The relay would start the old starter fine but the old starter needed replaced as it was never shimmed and was sticking every now and then. I got a rebuilt 24v...

Gear Reduction Starter Bolt/ shim question and other questions???? Hello does anyone know off hand if the gear reduction starter and the direct drive starter use the same starter bolts? Reason im asking is my old direct drive starter took a crap on me and i picked up a rebuilt gear reduction...

My water in fuel light came on after using some diesel i had in a can. My light never came on ever untill using some old diesel that must have had some water in it. e Question 1 I see where the petcock is on the fuel filter housing. Are you suppose to drain the petcock while the m1009 is...

Need to replace the fuel tank on the m1009 blazer. will a 31 gal tank fit? I see where they sell 31 gal tanks and the dimensions for the 25 gal and 31 gal are the same? Has anyone had to replace their fuel tanks if so what brand tank did you go with? any brands to stay away from? anything else i...

Been looking in the -20 Tm and i cant find a pic of the instrument cluster plug/connector and what all the wires listed? Can someone guide me in right direction. Thanks

Well i have been working on putting another 6.2 diesel in my m1009 blazer and its been a lil while since ive had the alternators off and batteries out. I was wondering if someone here could help me out. I forgot how my alternators are supposed to be hooked up to the brackets and how the brackets...

Have m1009 with 6.2 diesel in it and i keep reading where the walker exhaust pipe kits will work for these military blazers. I cant find a part number for ordering this exhaust can anyone help? Preferrably an autozone part number for the exhaust pipe kit from manifold back. Thanks

Hello has anyone on here replaced there old radiator with a brand new one in there m1009? What type did you get, recommend, and to stay away from? I see they make all aluminum ones also plastic tank and alum core. I know they still make the copper ones but they want an arm and a leg for them...

Id like to do the mod for manually warming glow plugs. I been searching and all i have been finding are threads where memebers where having certain problems after they done the mod. Im having a problem finding the sticky or link to a "HOW TO" step by step instructions on what all is needed for...

Is there a way to find out what year a 6.2 hummer block was manufactured based on what they stamp on the block? Im looking into buying an engine and want to know if there are any ways to determine the year of what your looking at? That way i can drive the blazer untill i get a crack free block...

Can anyone list any military surplus sites that sell various items that are CUCV related ? Are there any sites that sell 6.2 engines like the military ones they swaped out with low miles? If you can think of any please list Thanks 0 )

I need to rebuild an engine in a m1009. The original block looks nice except for some cracks along webs around mains and with cracks you dont know how long till it goes. Is there /are there any companies that just manufacture the engine block? Are there companies out there that just make bare...